200-566-000-112 机架控制器和通信接口卡对

VM600 CPu和lOCN模块化CPu卡和输入/输出卡是一个机架控制器和通信接口卡对，作为系统控制器和数据通信网关的VM600机架机器保护系统(MPS)和/或状态监测系统(CMS)从梅吉特的振动仪表产品线。
不同版本的CPUx/lOCx卡对不同版本的CPUx/lOCx机架控制!和通信接口卡对，如下所示:
cpu /lOCN是原始版本，具有前面板显示，支持modbus RTU/TCP或PROFINET
(内线200 – 595 vvv_wvvi。cpu /lOCR是一个具有机架控制器冗余和支持Modbus RTU/TCP(PNR 600-007-VVV-VVV)的版本。
CPUR2/lOCR2是一个对现场总线数据进行数学处理的版本，支持Modbus TCP和PROFIBUS (DPIPNR 600-026-000-VVV)。
振动计:VM600基于机架的监测系统是梅吉特的解决方案的一部分，用于发电和石油和天然气行业的旋转机械的保护和监测。当集中式监控系统需要中到大量测量点(信道)时，推荐使用VM600。它通常用于监测和/或保护大型机械，如燃气，蒸汽和水力涡轮机，发电机。较小的机器，如压缩机，风扇，电机，泵和螺旋桨，以及平衡。防喷器(BOP)设备

不同的VM600监测卡可用于机械保护，状态监测和/或燃烧监测应用。例如，机械保护卡如mpc4 / l0c4机械保护卡对和amc8 /l0C8T模拟监测卡对，状态监测卡如xmv16 /Xl016T振动监测卡对和XMC16/Xl016T燃烧监测卡对。
RLC16继电器卡是一个可选卡，用于在四个继电器断开时提供额外的继电器。MPC4/IOC4T或AMC8/ 10c8t卡对是不够的。
CPUx/lOCx机架控制器和通信接口卡对(cpu /IOCN, cpu /IOCR或CPUR2/ ioc2)是可选卡，用于提供额外的YM600系统功能，如配置管理“热插拔”与自动重新配置，前面板显示，CPUx/lOCx卡对冗余，现场总线数据处理。前面板报警复位(AR)按钮，MPS机架(CPUx)安全，系统事件和测量事件记录，现场总线通信(Modbus)。PROFIBUS和/或PROFINET)和/或
通信冗余。注:不同版本的CPUx/ cxrackcontroller和通信接口卡对支持不同的ym600系统功能组合。
VM600基于机架的监测系统补充了基于振动智能模块的分布式监测系统，这些系统也可以从梅吉特的振动仪表产品线中获得。

200-566-000-012-200-566-101-012-VM600-IOCN

The VM600 CPUM and lOCN modular CPu cardand input/output card is a rack controller andcommunicafions interface card pair that acts asa system confroller and data communicationsgateway for a VM600 rack-based machineryprotection system (MPS) and/or conditionmonitoring system (CMS) from Meggitt’sVibro-Metere product line.
Different versions of CPUx/lOCx card pairDifferent versions of CPUx/lOCx rack controlle!and communications interface card pair areavailable, as follows:
.The CPUM/lOCN is the original version with afront-panel display and support forModbUS RTU/TCP Or PROFINET
(PNR 200-595-VVV_WVVI.The CPUR/lOCR is a version with rack controllerredundancy and support for Modbus RTU/TCP(PNR 600-007-VVV-VVV).
The CPUR2/lOCR2 is a version withmathematical processing of fieldbus data andsupport for Modbus TCP and PROFIBUS DPIPNR 600-026-000-VVV).
VM600 rack-based monitoring systemsThe Vibro-Meter: VM600 rack-based monitoringsystem is part of Meggitt’s solution for theprotection and monitoring of rotating machineryused in the power generation and oil & gasindustries.The VM600 is recommended when acentralised monitoring system with a medium tolarge number of measurement points(channelsis reguired. lt is typically used for the monitoringand/or protection of larger machinery such asgas,steam and nydro furbines, ana generators.smaller machines such as compressors, fans,motors,pumps and propellers, as well as balance.of-plant (BOP) equipment.

Different VM600 monitoring cards are availablefor machinery protection,condition monitoringand/or combustion monitoring applicafions. Forexample,machinery protection cards such as theMPC4/l0C4Tmachinery protecfion card pair andAMC8/l0C8T analogue monitoring card pair,and condifion monitoring cards such as theXMV16/Xl016T monitoring card pair for vibrationand XMC16/Xl016T monitoring card pair forcombustion.
The RLC16 relay card is an optional card used toprovide additional relays when the four relays pe!MPC4/IOC4T Or AMC8/l0C8T card pair are notenough.
The CPUx/l0Cx rack controller andcommunications interface card pairs (CPUM/IOCN,CPUR/IOCR Or CPUR2/IOCR2) are optionacards used to provide additional YM600 systemfuncfionality such as configuration management”hot-swapping” with automatic reconfigurationfront-panel display,CPUx/lOCx card pairredundancy,fieldbus data processing. front-panel alarm reset (AR) button, MPS rack (CPUx)security,system event and measurement eventlogging,fieldbus communications (Modbus.PROFIBUS and/or PROFINET) and/or
communications redundancy.Note:Different versions of CPUx/l0Cxrackconiroller and communications interface cardpair support different combinations of yM600system functionality.
VM600 rack-based monitoring systemscomplement the VibroSmart module-baseddistributed monitoring systems that are alsoavailable from Meggitt’s Vibro-Meter’ productline.