2300/20-00-01 2300 监测器具有两个地震式振动通道和一个转速通道

2300/20
 两路 4-20mA 输出
 两路可编程继电器输出
 “本特利内华达监测器组态软件”（包含供货范围内）通过以太网 10/100 Base-T 通讯接口对监测器组态
 一路专用转速和键相通道，支持涡流探头、磁阻发讯器、以及接近开关式传感器
 三路缓冲传感器输出（包括转速信号），提供短路和抗电磁干扰保护。每个信号的缓冲输出通过 BNC插头获取
 连续监测与保护
 LCD 显示屏显示振动幅值、设定值、以及转速
 两个加速度振动输入可同步采样，便于高级诊断分析
 关键测量值（通频峰值、峰-峰值、通频 RMS 有效值、等效峰值、通频积分峰值、转速）实时报警组态
 LED 指示灯显示监测器状态
 用于通道旁路、组态锁定、以及复位的接点输入
 可选配 Modbus® 以太网通讯

2300/20-02-00

The 2300 monitor features two seismic vibration channels and one rotational speed channel to provide continuous monitoring and protection for BOP auxiliary equipment. The 2300 dual channel monitor is the perfect fit for customers to proactively manage their auxiliary assets for passive maintenance where they are often out of production waiting for replacement of faulty equipment.
The 2300 series monitors support a variety of input interfaces and functions, enabling monitoring and protection based on asset equipment condition. 2300 has seismic vibration sensor input and speed sensor input; Outputs include relays, buffer sensor outputs, TCP/IP Ethernet, and LCD LCD displays. The 2300 series monitors are available in two models: 23/201 with 4-20 mA output and 23/252 with Trendmaster SPA bus interface.
The 2300/20 monitor can be used to replace earlier Bentley Nevada single-channel monitors such as the 1900/27, but more importantly it is a full-featured monitor designed to monitor and protect assets such as motors, pumps, and fans.
The functions of the 2300 series monitors can be configured by software, which is provided with the 2300 monitor. The monitor is also integrated with an LCD display and several LED light emitting diodes, which can display real-time channel data and status on the spot.
Effective plant asset management, especially effective management of mechanical assets and equipment, often relies on remote access using condition monitoring software such as System 1*.

2300/20
 Two 4-20mA outputs
 Two programmable relay outputs
 “Bentley Nevada Monitor Configuration Software” (included in the scope of supply) configs the monitor over an Ethernet 10/100 Base-T communication interface
 A dedicated speed and key channel supporting eddy current probes, reluctance transducers, and proximity switch sensors
 Three buffer sensor outputs (including speed signal) to provide protection against short circuit and electromagnetic interference. The buffered output of each signal is obtained via the BNC plug
 Continuous monitoring and protection
 LCD display displays vibration amplitude, set value, and speed
 Two acceleration vibration inputs can be sampled synchronously for advanced diagnostic analysis
 real-time alarm configuration of key measurement values (pass frequency peak, peak-to-peak, pass frequency RMS RMS RMS, equivalent peak, pass frequency integrated peak, speed)
 LED indicator shows the monitor status
 Contact input for channel bypass, configuration lock, and reset
 Modbus® Ethernet communication is optional