442G-MABR-UT-C03 多功能访问箱与CIP安全通过以太网/IP

Product Description

ACCESS BOX LOCK MOD POWER UNLOCK M20 ESTOP & 2 PB
Includes a high coded RFlD bolt actuator to achievethe highest level of tamper resistance in accordancewith lS0 14119
Offers both Power-to-Release and Power-to-Lockmodels for personnel safety or the protection ofmachine production
Offers the ability to be wired in a series and maintain aPLe Cat 4 rating for interlocking, guard lock monitoringand control of guardlockingIncludes a ClP Safety over EtherNet/lP version whichenables easy integration in a networked automationcontrol system using Studio 5000 Logix Designer@environment

The multifunctional access box with CIP Safety™ over EtherNet/IP™ is a combined interlocking module with guard locking and integrated control elements. The intended use of the access box is at entry points for full-body access into automation cells or areas that require restricted or controlled access.
This access box can be used in an integrated safety system with a GuardLogix®. safety controller. Safety data is exchanged by using CIP Safety via an
EtherNet/IP network.
In combination with a movable safety guard and the control system, this safety module can help prevent opening of the safety guard while a dangerous machine function is performed. The position of the guard locking is monitored during this process.
• Starting commands that cause a dangerous machine function must become active only when the safety guard is closed and locked.
• The guard locking module must not be unlocked until the dangerous machine function has ended.
• Closing and locking a safety guard must not cause automatic starting of a dangerous machine function. A separate start command must be issued.
The locking module detects the position of the safety guard and the position of the bolt actuator. The position of the locking arm is also monitored. The bolt actuator is moved into and out of the locking module by actuating the door handle. When the bolt is fully inserted into the locking module, the locking arm can lock the bolt actuator in this position.
The GuardLocked input signal is turned on only when the locking bolt is sensed in its extended position in the lock module and the locking arm is in position (for example, the guard is closed and the bolt is both extended and locked).