A06B-6114-H109 FANUC 伺服放大器模块SVM 1-360 IαI

  • A06B6114H109
  • 制造商已停产
  • 伺服驱动
  • 伺服放大器
  • 伺服放大器模块SVM 1-360 IαI
  • 阿尔法I伺服驱动器型号SVM1-360I
  • 电脑数值控制(Computer Numerical Control)
分类:

电话:18059884797 (微信同号)

QQ:3095989363

山西润盛
(加微信咨询)
—————————————————————————
★一手货源,没有中间商赚差价!库存1个亿!
★只要是您想要的,我能帮您找到,价格最优!
★厂家原装,保证售后服务,所有产品质保1年!
————————————————————————— 今日有货

产品详情

☆产品详情:A06B-6114-H109 FANUC 伺服放大器模块SVM 1-360 IαI

  • A06B6114H109
  • 制造商已停产
  • 伺服驱动
  • 伺服放大器
  • 伺服放大器模块SVM 1-360 IαI
  • 阿尔法I伺服驱动器型号SVM1-360I
  • 电脑数值控制(Computer Numerical Control)

伺服驱动器是现代传动技术的高端产品,被广泛应用于工业机器人及数控加工中心等自动化设备中。尤其是应用于控制交流永磁同步电机的伺服驱动器已经成为国内外研究热点。当前交流伺服驱动器设计中普遍采用基于矢量控制的电流、速度、位置3闭环控制算法。该算法中速度闭环设计合理与否,对于整个伺服控制系统,特别是速度控制性能的发挥起到关键作用。

伺服驱动器(servo drives)又称为“伺服控制器”、“伺服放大器”,是用来控制伺服电机的一种控制器,其作用类似于变频器作用于普通交流马达,属于伺服系统的一部分,主要应用于高精度的定位系统。一般是通过位置、速度和力矩三种方式对伺服电机进行控制,实现高精度的传动系统定位,目前是传动技术的高端产品。

在伺服驱动器速度闭环中,电机转子实时速度测量精度对于改善速度环的转速控制动静态特性至关重要。为寻求测量精度与系统成本的平衡,一般采用增量式光电编码器作为测速传感器,与其对应的常用测速方法为M/T测速法。M/T测速法虽然具有一定的测量精度和较宽的测量范围,但这种方法有其固有的缺陷,主要包括:1)测速周期内必须检测到至少一个完整的码盘脉冲,限制了最低可测转速;2)用于测速的2个控制系统定时器开关难以严格保持同步,在速度变化较大的测量场合中无法保证测速精度。因此应用该测速法的传统速度环设计方案难以提高伺服驱动器速度跟随与控制性能。

伺服驱动器原理:目前主流的伺服驱动器均采用数字信号处理器(DSP)作为控制核心,可以实现比较复杂的控制算法,实现数字化、网络化和智能化。功率器件普遍采用以智能功率模块(IPM)为核心设计的驱动电路,IPM内部集成了驱动电路,同时具有过电压、过电流、过热、欠压等故障检测保护电路,在主回路中还加入软启动电路,以减小启动过程对驱动器的冲击。

功率驱动单元首先通过三相全桥整流电路对输入的三相电或者市电进行整流,得到相应的直流电。经过整流好的三相电或市电,再通过三相正弦PWM电压型逆变器变频来驱动三相永磁式同步交流伺服电机。功率驱动单元的整个过程可以简单的说就是AC-DC-AC的过程。整流单元(AC-DC)主要的拓扑电路是三相全桥不控整流电路。

●所有产品图片均为真实人物,如果您需要更多照片,请联系我们。

●所有售出的产品质量保证一年,如果有质量问题我们可以给您更换或退回。

●我们是中国最大的工控产品供应商,如果您需要其他类型的产品,请向我们咨询,我们会立即给您答复。

●如果您购买的不止一个,我们会给您折扣,如果您收到价格,请与我们联系,我们将尽力让您满意,我们的客户来自世界各地,欢迎来到中国。

A06B-6114-H109

A06B6114H109
The manufacturer has discontinued production
Servo drive
Servo amplifier
Servo amplifier module SVM 1-360I αI
Alpha I servo drive model SVM1-360I
Computer Numerical Control

Servo drive is a high-end product of modern transmission technology, which is widely used in industrial robots and CNC machining centers and other automation equipment. In particular, the servo drive used to control AC permanent magnet synchronous motor has become a research hotspot at home and abroad. The current, speed and position-3 closed-loop control algorithm based on vector control is widely used in the design of AC servo drivers. Whether the speed closed-loop design in this algorithm is reasonable or not plays a key role in the whole servo control system, especially in the performance of speed control.

servo drives (servo drives), also known as “servo controller”, “servo amplifier”, is a controller used to control the servo motor, its role is similar to the frequency converter acting on the ordinary AC motor, is a part of the servo system, mainly used in high-precision positioning system. Generally, the servo motor is controlled through three ways of position, speed and torque to achieve high-precision transmission system positioning, and it is currently a high-end product of transmission technology.

In the speed closed loop of servo drive, the real-time speed measurement accuracy of motor rotor is very important to improve the dynamic and static characteristics of speed control of speed ring. In order to find the balance between measurement accuracy and system cost, incremental photoelectric encoder is generally used as the speed measurement sensor, and its corresponding common speed measurement method is M/T speed measurement. Although M/T velocity measurement method has a certain measurement accuracy and a wide measurement range, but this method has its inherent defects, including: 1) the speed measurement cycle must detect at least one complete code pulse, limiting the minimum measurable speed; 2) The timer switches of the two control systems used for speed measurement are difficult to maintain strict synchronization, and the accuracy of speed measurement cannot be guaranteed in the measurement occasions with large speed changes. Therefore, it is difficult to improve the performance of servo drive speed following and control by using the traditional speed loop design method.

Servo driver principle: At present, the mainstream servo drivers all use digital signal processor (DSP) as the control core, which can realize more complex control algorithms, and realize digitalization, networking and intelligence. Power devices generally use intelligent power module (IPM) as the core design of the drive circuit, IPM internal integrated drive circuit, and has overvoltage, overcurrent, overheating, undervoltage and other fault detection protection circuit, in the main circuit also add a soft start circuit to reduce the impact of the start process on the driver.

The power drive unit first rectifies the input three-phase or mains through the three-phase full-bridge rectifier circuit to obtain the corresponding direct current. The three-phase permanent magnet synchronous AC servo motor is driven by the three-phase sinusoidal PWM voltage inverter after the rectified three-phase power or mains. The whole process of the power drive unit can be simply said to be the AC-DC-AC process. The main topological circuit of the rectifier unit (AC-DC) is the three-phase full-bridge uncontrolled rectifier circuit.

销售经理:何姗姗

电子邮件:sales@xiongbagk.cn

手机/微信: +86-18059884797

QQ3095989363

☆公司详情

我们拥有大量的工业控制系统备件库存。 制造商涵盖范围广泛,并与广泛的供应商合作。

快速发货,为您提供最佳解决方案,满足您的紧急需求 如果我们没有您需要的库存请求报价,我们通常可以为您找到。

雄霸自动化还提供优质的过时/停产备件,以延长已安装控制系统的安装寿命并降低维护成本。

☆交货:

DHL,UPS,联邦快递,EMS快递通常需要3-10个工作日,中国邮政航空邮件/ 香港邮政航空邮件运输通常需要7-35天,具体取决于交付到的国家/地区。在极少数情况下,严格的清关会使交货时间更长一些,请耐心等待。

更多产品:A06B-6114-H109 FANUC 伺服放大器模块SVM 1-360 IαI

MOTOROLA MVME2400 WINGREEN DUDT_DETECTION_V2.0_A01 03ZSTJ0-00-201-RS GE VMIVME-7750 VMIVME-7750-834 350-027750-834 D
ABB CI855K01 WINGREEN IPB PCB V2.0_A01 03ZSTL6-00-201-RS ABB 3BHE014185R0001 UUD148AE01
GE IS420ESWBH1A ABB MPRC086444-005 PILZ 301120
EPRO PR6426/010-010+CON021 GE V7768-320001 350-9301007768-320001 C LAETUS LLS570-05
A-B 2711-K10C20/E Yaskawa JAPMC-CP2230-E GE 469-P1-HI-A20-E
ABB 3HAB8101-18/09A PARKER 87-008145-03 BENTLY 3500/50-01-00-01
EPRO PR9268/200-000 ABB PFEA111-65/3BSE050090R65 A-B 2094-BM02-S/B
Rolls-Royce SLIO 02 EATON XVS-440-57MPI-1-1A0 ETHERWAN   EL100T
ABB PFTL101A 0.5KN 3BSE004160R1 SAIA-BURGES PCD2.W200 XYCOM XVME-660/716
ABB PFTL101A 2.0KN 3BSE004172R1 NI NI-9853 ULTRA SLIMPAK G448-0002
SONIX AL8XGTE1S 8055003 SCHNEIDER 140CPU67160 BALZERS IKR020
SCHNEIDER 140CPU67060 TRICONEX 8312 ABB PFSA140 3BSE006503R1
ABB KUC755AE106 3BHB005243R0106 SAIA-BURGES PCD2.W600 ABB PU515A 3BSE032401R1

免责声明:

雄霸销售工业自动化零件,包括新产品和停产产品,以及购买此类特色产品通过独立渠道进行。

雄霸不是授权经销商,本网站上特色产品的经销商或代表。

所有产品名称/产品图片,本网站上使用的商标、品牌和徽标是其各自所有者的财产。

带有这些名称、图像、商标、品牌和徽标的产品描述、描述或销售仅用于识别目的,

并不意味着与任何权利持有人有任何从属关系或授权。

——————————————————————————————————————–

本篇文章出自厦门雄霸电子商务有限公司漳州分公司官网,转载请附上此链接: http://www.xiongbagk.cn/