产品详情
A6210 Emerson Epro 监测模块
A6210概况：
所需信号输出类型（振动或位置）的发射机的配置
测量范围是通过跨接设置。
为达到较高的测量精度，将发射机中的沪深9360调整为选
传感器类型和电缆长度（5与6422米或9米电缆或5与6423米或9米
电缆）。一起，A6210发射器和传感器组成的测量链。改变
传感器类型和/或传感器的电缆长度需要重新校准的发射机保持
准确度。
该测量链的特性是适用于参考材料4铬钼42，
根据SAE 4140。
在安装过程中，A6210调整传感器头和传感器之间的距离
测量目标。传感器调整的标准是缓冲输出信号
发射机。
沪深9360变送器是在一个封闭的内置弹簧DIN轨夹坚固的外壳。一个
可选面板适配器可用。连接电涡流传感器与一个可插拔的柠檬
在发射机前面的连接器。电流环的额定电源电压
电动变送器直流24 Vzui大500Ω分流。测量值缩放
4-20mA输出。
A6210 Overview:
A6210 Configuration of the transmitter for the desired signal output type (vibration or position)
The measuring range is set by jumper.
In order to achieve higher measurement accuracy, adjust the CSI 9360 in the transmitter to
Sensor type and cable length (5 with 6422m or 9m cable or 5 with 6423m or 9m
cable). Together, the A6210 transmitter and sensor form the measurement chain. Change
Transmitter type and/or sensor cable length need to be recalibrated to keep
Accuracy.
The measuring chain is characterized for reference material 4 Cr-Mo 42,
According to SAE 4140.
During installation, the A6210 adjusts the distance between the sensor head and the sensor
Measurement target. The criterion for sensor adjustment is to buffer the output signal
transmitter.
The CSI 9360 Transmitter is enclosed in a sturdy housing with internal spring DIN rail clips. One
Optional panel adapters available. Connecting the Eddy Current Sensor with a Pluggable Lemon
connector on the front of the transmitter. Rated supply voltage of current loop
Electric transmitter DC 24 Vmax 500Ω shunt. Measured value scaling
4-20mA output.
Our main products are as follows:
Chapter 1. Invensys Foxboro: I / a series system, FBM (field input / output module) sequential control, ladder logic control, accident recall processing, digital to analog conversion, input / output signal processing, data communication and processing, etc.
Chapter 2. Invensys Triconex: redundant fault-tolerant control system, modern fault-tolerant controller based on triple modular redundancy (TMR) structure.
Chapter3. Ovation Emerson: spare parts for ovation system, WDPF system and MAX1000 system.
Chapter 4. Rockwell Allen Bradley: reliance Ryan, SLC500 / 1747 / 1746, Micrologix / 1761 / 1763 / 1762 / 1766 / 1764, CompactLogix / 1769 / 1768, Logix5000 / 1756 / 1789 / 1794 / 1760 / 1788, PLC-5 / 1771 / 1785, etc.
Chapter 5. Rockwell ICs triplex: processor module, transceiver module, channel digital module, expander interface module, etc. t8451 / t8431 / t8461 / t8110b / t8151b / t8403 / t8402 / t8311 / t8151b / t8310 / t8448, etc
Chapter6. Schneider Modicon: quantum 140 series processor, control card, power module, etc.
Chapter7. ABB: industrial robot spare parts dsqc series, Bailey infi 90, etc.
Chapter8. ABB Control Board ABB thyristor ABB IGCT module
Chapter9. Siemens: Siemens Moore, Siemens SIMATIC C1, Siemens CNC system, etc.
Chapter10. Motorola: mvme 162, mvme 167, mvme 1772, mvme 177 and other series.
Chapter11. Xycom: I / O, VME board, processor, etc.
Chapter12. GE Fanuc: various spare parts such as modules, cards and drives. (ic693 ds200 ds380 ds250 vmivme series modules)
Chapter13. Yaskawa (Yaskawa): servo controller, servo motor and servo driver.
Chapter14. Bosch Rexroth: indramat, I / O module, PLC controller, drive module, etc.
Chapter15. Woodward: SPC valve position controller, peak150 digital controller.
Chapter 16. Bently Nevada: 3500 vibration monitoring system, Bentley monitor, Bentley interface module, Bentley power module
