DC10502.000-012 DC10502线性执行器 用于康明斯C系列

产品说明

All electronic equipment is static-sensitive, some components more than others. To protect these components from static damage, you must take special precautions to minimize or eliminate electrostatic discharges. Follow these precautions when working with or near the control.

1. Before doing maintenance on the electronic control, discharge the static electricity on your body to ground by touching and holding a grounded metal object (pipes, cabinets, equipment, etc.).

2. Avoid the build-up of static electricity on your body by not wearing clothing made of synthetic materials. Wear cotton or cotton-blend materials as much as possible because these do not store static electric charges as much as synthetics.

3. Keep plastic, vinyl, and Styrofoam materials (such as plastic or Styrofoam cups, cup holders, cigarette packages, cellophane wrappers, vinyl books or folders, plastic bottles, and plastic ash trays) away from the control, the modules, and the work area as much as possible.

This manual provides instructions on the installation of the APECS linear actuator DYNC-10502 on the Cummins “C” series range diesel with a Bosch P3000, MW or “A” series pump. The linkage connects to the stop lever of the RSV mechanical governor.

Layout Diagram  See parts list for item numbers noted on Figures 1 and 2.

As shown in Figure 1, the electric governor linkage connects to a new stop lever (10).

The G-Drive engine flywheel has 127 teeth. The mechanical governor throttle lever must be set and locked to operate the engine at 10% above nominal speed to avoid limiting fuel by the mechanical governor under full load.

As Figure 2 depicts, the fuel pump stop shaft is on the backside pointing toward the engine block.