DS200TCCBG88ED GE 通用扩展模拟I/O板

规格:

零件号:ds 200 tcbg 8 bed
制造商:通用电气公司
功能:通用扩展模拟I/O板
系列:马克V LM
输入数量:12
工作温度:-30至65摄氏度
电源电压:125伏直流电
工艺:表面贴装
纸板尺寸:33.0厘米高x 17.8厘米
供货情况:有现货
原产国:美国
手册:GEH-6153

功能描述:

DS200TCCBG8BED是通用电气公司制造和设计的通用扩展模拟I/O板，作为用于GE Speedtronic燃气轮机控制系统的Mark V LM系列的一部分。通用扩展模拟I/O板(TCCB)缩放和调节从P1内核中的TCEB板和安装在R5内核上的TBCB端子板读取的额外模拟I/O信号。这些信号包括线路电流输入、RTD、发电机和母线电压输入以及4-20 mA/0-1 mA输入。通过3PL连接器，经过缩放和调节的信号被传送到STCA板。

TCCB配置:

硬件:硬件跳线J1、J2、JBOY3乐队、J4和J5用于提供发电机和母线电压监控功能，以及Mark V LM中的线路电流监控功能。硬件跳线J14用于将RS232串行端口连接到DCOM。硬件跳线J15和J16用于测试目的。有关该板硬件跳线设置的信息，请参考附录A和操作员界面上的硬件跳线屏幕。

软件:RTDs、mA输入、发电机和母线电压以及线路电流设置的I/O配置常数输入到HMI上的I/O配置编辑器中，如下所述。

DS200TCCBG8BED

SPECIFICATIONS:

Part No: DS200TCCBG8BED
Manufacturer: General Electric
Function: Common Extended Analog I/O Board
Series: Mark V LM
Number of Inputs: 12
Operating temperature: -30 to 65 ºC
Power Supply Voltage: 125 V dc
Technology: Surface Mount
Board Size: 33.0 cm high x 17.8 cm
Availability: In Stock
Country of Origin: USA
Manual: GEH-6153

FUNCTIONAL DESCRIPTION:

DS200TCCBG8BED is a Common Extended Analog I/O Board manufactured and designed by General Electric as part of the Mark V LM Series used in GE Speedtronic gas turbine control systems. The Common Extended Analog I/O Board (TCCB) scales and conditions additional analog I/O signals that are read from the TCEB board in the P1 core and the TBCB terminal board installed on the R5 core. These signals consist of the line current inputs, RTDs, generator and bus voltage inputs, and 4-20 mA/0-1 mA inputs. Through the 3PL connector, the scaled and conditioned signals are delivered to the STCA board.

TCCB CONFIGURATION:

Hardware: The hardware jumpers J1, J2, J3, J4, and J5 are used to provide the generator and bus voltage monitoring functions, and the line current monitoring function in the Mark V LM. Hardware jumper J14 is used to connect the RS232 serial port to DCOM. Hardware jumpers J15 and J16 are used for testing purposes. Refer to Appendix A and the hardware jumper screen on the operator interface for information on the hardware jumper settings for this board.

Software: I/O configuration constants for the RTDs, mA inputs, the generator and bus voltage, and line current settings are entered in the I/O Configuration Editor located on the HMI as described below.