EL3040 ABB Magnos206氧分析仪用于测量过程气体或N2中的O2

以下分析仪可供选择:
•Uras26红外光度计，用于测量CO, NO, SO2等红外气体成分
•Magnos206氧分析仪用于测量过程气体或N2中的O2
ZO23微量氧分析仪用于测量纯气体(N2, CO2, Ar)中的O2
•Caldos27热导率分析仪用于测量具有不同热导率的二元气体混合物，例如O2中的Ar, Ar中的H2, N2中的CH4
•用于测量O2的电化学氧传感器
电化学氧传感器只能与Uras26红外光度计结合使用。
Magnos206氧分析仪和Caldos27热导率分析仪也可以与Uras26红外光度计结合使用。
ZO23微量氧分析仪不能与其他分析仪组合使用。气体分析仪只能安装一台ZO23微量氧分析仪。
每个分析仪每个样品组分有一个物理测量范围。一段物理测量范围可以通过现场配置映射到电流输出(模拟输出)。校准总是在物理测量范围内进行。允许的测量范围限制由单个分析仪的最小和最大测量范围的规范给出。
总共多达五个测量组件可以测量一个气体分析仪。

AO2020

The following analyzers are available for selection:
• Uras26 infrared photometer for the measurement of infraredactive gas components e.g. CO, NO, SO2
• Magnos206 oxygen analyzer for the measurement of O2 in process gas or in N2
• ZO23 trace oxygen analyzer for the measurement of O2 in pure gases (N2, CO2, Ar)
• Caldos27 thermal conductivity analyzer for the measurement of binary gas mixtures with different thermal conductivity e.g.  Ar in O2, H2 in Ar, CH4 in N2
• Electrochemical oxygen sensor for the measurement of O2
The electrochemical oxygen sensor can only be used in combination with the Uras26 infrared photometer.
The Magnos206 oxygen analyzer and the Caldos27 thermal conductivity analyzer can also be used in combination with the Uras26 infrared photometer.
The ZO23 trace oxygen analyzer cannot be used in combination with one of the other analyzers. Only one ZO23 trace oxygen analyzer can be installed in the gas analyzer.
Each analyzer has one physical measurement range per sample component. A section of the physical measurement range can be mapped to the current output (analog output) by on-site configuration. Calibration is always executed in the physical measurement range. The permissible measurement range limits are given by the specification of the smallest and largest measurement ranges for the individual analyzers.
A total of up to five measurement components can be measured with one gas analyzer.