描述
品牌 | 品名 | 产品型号 | 订货号 |
GE | 模块 | IC660BBA025 | |
产地 | 可售卖地 | 是否进口 | 保修期 |
美国 | 全国、国外 | 是 | 一年 |
发货地点 | 发货方式 | 使用方式 | 适用行业 |
厦门 | 顺丰快递 | 调试安装 | 电厂钢厂水泥厂船舶造纸 |
服务优势 | 国外进口 、 备货供应、 | 价格合适、品质可靠 | 图片仅供参考实物为准 |
产品特点 | 一手货源、 按型号供货 | 售后有保障 | 何经理1805988-4797 |
目录号为IC660BBA025的艾默生自动化模块是genius I/O系列独立的genius协议模块的一部分。IC660BBA025是一款专门的模拟输出模块,配有六(6)个模拟输入通道,能够适应0-24 mA和4-20 mA模拟信号范围。
IC660BBA025也称为块I/O模块,采用无机架设计,可以安装在外壳内,为工业元件提供适当的保护。该模块配有led状态指示器,如单元正常和I/O启用LED。它配有一分钟额定1500V的块到块隔离。该模块还具有内部诊断功能,能够检测欠量程、超量程和反馈错误。
IC660BBA025的每个通道的分辨率为6 A,输出精度为满量程读数的0.15%,输出更新频率为25ms。此外,该模块的热漂移为每摄氏度35 PPM。
IC660BBA025的工作温度为0摄氏度至+60摄氏度(+32摄氏度至+140华氏度),储存温度为-40摄氏度至+100摄氏度(-40摄氏度至+212华氏度),相对湿度为5-95%,无冷凝。它必须安装在振动不超过5-10赫兹0.2英寸(5.08毫米)位移、10-200赫兹1G的平面上。
IC660BBA025还具有高度适用于过程的可配置输出属性。这包括输出保持最后状态或默认、缩放至工程值、CPU冗余和输出反馈检查。此外,可以禁用或启用每个电路的故障报告。如果一些信道打算被配置用于某个信号,以便在系统的未来修改中使用,这是实用的。
IC660BBA025电流源输出模块是由GE Fanuc制造的24至48伏DC电流源模拟输出模块。它配有6个独立的输出电路,可用于接收4至20毫安额定信号的设备。其隔离输出电路与总线开关模块输出在电气上是共用的。模块本身为输出的电流环路供电。其输出通道使用两个12位数模转换器进行信号转换。模拟输出数据有12字节的输出数据和2字节的工程数据。模块的电源电压为18至56伏DC,最大电流为600毫安。
IC660BBA025电流源输出模块执行多种诊断,包括输出欠量程和超量程诊断、输出反馈错误诊断和CPU/内部故障报告。它向手持监视器报告所有上述错误,以便用户可以采取必要的措施来解决这些错误。它还检测输出电路中的硬件故障和布线错误,以及电路的电流水平,以报告输出反馈错误。如果模块由于时间不足而报告了讨厌的诊断,请确保增加反馈时间。对于输入总线开关设备和现场布线,用户可以使用模块的端子5至32。总线切换模块没有极性。单元正常状态LED闪烁,通知用户正在诊断错误。IC660BBA025电流源输出模块不能配置为控制器冗余或备用冗余。
IC660BBA025K
The Emerson Automation module with catalog number IC660BBA025 is part of the genius I/O series of stand-alone, Genius protocol capable modules. The IC660BBA025 is specifically an analog output block that comes with Six (6) analog input channels, able to accommodate 0-24 mA and 4-20 mA analog signal ranges.
Also known as Block I/O modules, the IC660BBA025 has rackless design that can be installed inside an enclosure that provides appropriate protection against industrial elements. This module has is provided with LED status indicator such as Unit OK and I/O enabled LEDs. It comes with a block to block isolation rated 1500V for one minute. This module is also provided with internal diagnostic capability, able to detect Underrange, Overrange and Feedback error.
Each channel of the IC660BBA025 has resolution of 6µA with output accuracy of 0.15% of full scale reading and output update frequency of 25ms. Additionally, this module has Thermal drift of 35 PPM per degree Celsius.
The IC660BBA025 has an operating temperature of 0degrees C to +60degrees C (+32degrees to +140degrees F) and storage temperature of -40degrees to +100degrees C (-40degrees to +212degrees F) with relative humidity of 5-95%, non-condensing. It must be installed to a flat surface with vibration not exceeding 5-10 Hz 0.2″ (5.08mm) displacement, 10-200 Hz at 1G.
The IC660BBA025 also has configurable output properties that are highly application to the process. This includes Output hold last state or default, scaling to engineering values, CPU redundancy and output feedback checking. Additionally, fault reporting can be disabled or enabled per circuit. This is practical if some channels are meant to be configured for a certain signal for use in future modification of the system.
The IC660BBA025 Current-Source Output Block is a 24 to 48 Volts DC current-source analog output block manufactured by GE Fanuc. It comes with 6 independent output circuits made to be used with devices that receive 4 to 20 milliamps rated signals. Its isolated output circuits are electrically common to bus switching module outputs. The block itself is made to provide power to the current loops of the output. Its output channels use two 12-bit D/A converters for signal conversion. The analog output data has 12 bytes of output data and 2 bytes of engineering data. The power supply voltage of the module is 18 to 56 Volts DC and the maximum current is 600 milliamps.