IC694MDL231 Rx3i PACSystem控制器隔离输入模块

IC694MDL231是GE Fanuc为Rx3i PACSystem控制器系列提供的240 VAC隔离输入模块。该模块配有八个隔离输入点，每个输入点都有自己的公共电源输入端子。这些输入电路是电抗（电阻/电容）输入。输入点的电流将导致输入状态表（%I）中的逻辑1。

输入特性与各种输入设备相匹配，包括按钮、限位开关和电子接近开关。由于这些输入是隔离的，因此每个输入都可以由单独的交流电源供电。用户必须供电来操作现场设备。该模块需要交流电源，与DC电源不兼容。

LEDS提供了重要信息。八个绿色led指示点1至8的开/关状态。标签上的红色条带警告用户IC694MDL231是高压。开态电压为148-264伏交流电压，关态电压为0-40伏交流电压。开态电流最小为6mA，关态电流最大为2.2mA。开/关响应时间最长分别为30毫秒和45毫秒。该模块可以安装在RX3i系统的任何I/O插槽中。

技术条件

IC694MDL231

IC694MDL231 is a 240 VAC Isolated Input Module by GE Fanuc for the Rx3i PACSystem controller series. This module is equipped with eight isolated input points, each having its own common power input terminal. These input circuits are reactive (resistor/capacitor) inputs. Current into an input point will result in a logic 1 in the input status table (%I).

Input characteristics are matched with a variety of input devices, including pushbuttons, limit switches, and electronic proximity switches. Since these inputs are isolated, each input can be powered by a separate AC power source. The user must supply power to operate the field devices. This module requires an AC power source and is not compatible with a DC power source.

LEDS provide important information. Eight green LEDs indicate the ON/OFF status of points 1 through 8. Red bands situated on the label warn the user that IC694MDL231 is high-voltage. On-state voltage is 148-264 VAC while off-state voltage is 0-40 VAC. On-state current is 6mA minimum with off-state current at 2.2mA maximum. On/off response times are 30ms and 45ms maximum respectively. This module can be installed in any I/O slot in an RX3i system.

Technical Specifications