IS200EGPAG1BEC 门脉冲放大器板 用于电力电子设备的控制板

IS200EGPAG1BEC是GE公司生产的门脉冲放大器板，型号为IS200EGPAG1BEC。它是一种用于电力电子设备的控制板，可以连接到电源转换模块，并接收来自安装在SCR散热器上的两个热开关的反馈。这些开关在警报级别和跳闸级别触发和打开，并直接连接到IS200EGPAG1BEC。该板具有五个跳线，允许用户选择所需的特定应用配置。

IS200EGPAG1BEC是GE通用电气的一款门脉冲放大器板。它主要用于电力电子设备的控制，可以接收来自安装在SCR散热器上的两个热开关的反馈。这些开关在警报级别和跳闸级别触发和打开，并直接连接到IS200EGPAG1BEC。

该板具有五个跳线，允许用户选择所需的特定应用配置。它通常需要从其中一个EPDM模块获取电源，但也可以独立运行。

IS200EGPAG1BEC门脉冲放大器板在电源转换柜中应用，可以连接到电源转换模块。虽然该板可以独立运行，但通常需要从其中一个EPDM模块获取电源。该板接收来自安装在SCR散热器上的两个热开关的反馈，这些开关在警报级别和跳闸级别触发和打开，并直接连接到IS200EGPAG1BEC。

IS200EGPAG1BEC板需要以下配置：

1. 电源模块：IS200EGPAG1BEC板需要连接到一个电源模块上，该电源模块可以为它提供所需的电源。通常，这种电源模块是EPDM模块，但具体情况可能因应用和设备而异。
2. 跳线：IS200EGPAG1BEC板具有五个跳线，这些跳线可以用于选择所需的特定应用配置。用户可以通过调整跳线的连接方式来满足不同的需求。
3. 热开关：IS200EGPAG1BEC板可以接收来自安装在SCR散热器上的两个热开关的反馈。这些开关在警报级别和跳闸级别触发和打开，并直接连接到IS200EGPAG1BEC板。
4. 控制逻辑：IS200EGPAG1BEC板还具有控制逻辑，可以处理来自热开关的信号，并根据这些信号生成相应的控制信号，用于控制电力电子设备的运行。

需要注意的是，具体的配置方式可能因应用和设备而异，因此建议在配置前先了解相关应用和设备的技术文档或手册。

IS200EGPAG1BEC

IS200EGPAG1BEC is a gate pulse amplifier board manufactured by GE Corporation, model IS200EGPAG1BEC. It is a control board for power electronics that can be connected to a power conversion module and receives feedback from two thermal switches mounted on the SCR radiator. These switches trigger and open at alarm and trip levels and are directly connected to IS200EGPAG1BEC. The board features five jumpers that allow the user to select the desired application-specific configuration.

The IS200EGPAG1BEC is a gate pulse amplifier board from GE. It is mainly used for the control of power electronics and can receive feedback from two thermal switches mounted on the SCR radiator. These switches trigger and open at alarm and trip levels and are directly connected to IS200EGPAG1BEC.

The board features five jumpers that allow the user to select the desired application-specific configuration. It usually requires power from one of the EPDM modules, but can also operate independently.

The IS200EGPAG1BEC gate pulse amplifier board is used in the power conversion cabinet and can be connected to the power conversion module. Although the board can operate independently, it usually requires power from one of the EPDM modules. The board receives feedback from two thermal switches mounted on the SCR radiator that are triggered and turned on at alarm and trip levels and are directly connected to the IS200EGPAG1BEC.

The IS200EGPAG1BEC board requires the following configurations:

Power module: The IS200EGPAG1BEC board needs to be connected to a power module that can provide it with the power it needs. Typically, this power module is an EPDM module, but the specifics may vary by application and device.
Jumpers: The IS200EGPAG1BEC board has five jumpers that can be used to select the desired application-specific configuration. Users can adjust the connection mode of the jumper to meet different needs.
Thermal switch: The IS200EGPAG1BEC board can receive feedback from two thermal switches mounted on the SCR radiator. These switches trigger and open at alarm and trip levels and are directly connected to the IS200EGPAG1BEC board.
Control logic: The IS200EGPAG1BEC board also has a control logic that can process signals from thermal switches and generate corresponding control signals based on these signals for controlling the operation of power electronic devices.

Note that the configuration method may vary according to the application and device. Therefore, you are advised to obtain the technical documents or manuals of the related application and device before configuration.