IS200JPDHG1AAA GE Mark VI配电卡

Mark VI配电卡是一种电子元器件，它通常由125Vdc电池系统供电，但也可以通过120/240VAC电源供电。它使用带有隔离变压器的电源转换器将功率整流至125Vdc。对于燃气轮机，点火变压器需要单独的电源，短路保护为20A或更低。这种配电卡在高密度配电方面有应用。

Mark VI配电卡具有以下优点：

1. 实时监测和诊断设备的工作状态，检测故障和异常，并及时报警。
2. 具有自适应和智能控制功能，能够根据不同的工况和运行要求，自动调节各个控制参数，以实现最佳的工作效果和能源利用率。
3. 具有数据存储和分析能力，可以将历史数据存储在数据库中，并进行统计和分析，以帮助用户优化设备和工艺。

IS200JPDHG1AAA型号作为高密度配电卡销售，通常用于Mark VI系列。当该单元运行时，它可以向多达三个以太网交换机以及二十四个Mark VIe I/O包发出28伏直流电。如果需要，可以购买更多的JPDH包，然后连接在一起，为I/O包提供更多的电源。请注意，当将多个JPDH卡连接在一起时，它们必须以菊花链方式连接。

该板的物理组件是29个母插脚插头连接器。在这29个连接器中，2个是6针连接器，而剩余的27个连接器是2针连接器；二十四个连接器排成三排，每排八个。这些行中的连接器被标记为JT1到JT8、JR1到JR8和JS1到JS8。这些行是将主电源提供给独立I/O包的馈电点。I/O组件电路将包括一个温度系数保险丝装置，该保险丝用于支路保护以及提供一个正温度保险丝。

有许多危险场所可以使用IS200JPDHG1AAA板。可以使用该板的主要地点是ATEX 2区IIC组、I级2区A至D组和I级2区IIC组。该板也可用于非危险场所。非危险场所使用的认证代码为ULE207685。

IS200JPDHG1AAA

The Mark VI power distribution card is an electronic component that is usually powered by a 125Vdc battery system, but can also be powered by a 120/240VAC supply. It uses a power converter with an isolation transformer to rectify the power to 125Vdc. For gas turbines, the ignition transformer requires a separate power supply with short circuit protection of 20A or less. This type of distribution card has applications in high density distribution.

The Mark VI power distribution card has the following advantages:

Real-time monitoring and diagnosis of equipment working status, detection of faults and anomalies, and timely alarm.
With adaptive and intelligent control function, it can automatically adjust each control parameter according to different working conditions and operating requirements to achieve the best working effect and energy efficiency.
With data storage and analysis capabilities, historical data can be stored in a database, and statistics and analysis can be carried out to help users optimize equipment and processes.

The IS200JPDHG1AAA model is marketed as a high density power distribution card and is commonly used in the Mark VI series. When the unit is operating, it can send 28 volts of direct current to up to three Ethernet switches as well as twenty-four Mark VIe I/O packets. If needed, you can buy more JPDH packages and then connect them together to provide more power to the I/O packages. Note that when connecting multiple JPDH cards together, they must be Daisy chained.

The physical components of the board are 29 female pin plug connectors. Of these 29 connectors, 2 are 6-pin connectors, while the remaining 27 connectors are 2-pin connectors; Twenty-four connectors arranged in three rows of eight each. The connectors in these rows are labeled JT1 to JT8, JR1 to JR8, and JS1 to JS8. These lines are the feed points that provide main power to individual I/O packets. The I/O component circuit will include a temperature coefficient fuse device for branch protection as well as providing a positive temperature fuse.

There are many dangerous places where IS200JPDHG1AAA boards can be used. The main locations where the board can be used are ATEX Zone 2 IIC Group, Class I Zone 2 A to D Group and Class I Zone 2 IIC Group. The board can also be used in non-hazardous places. The certification code for non-hazardous sites is ULE207685.