NAE5510-3 JOHNSON 网络自动化引擎(NAE)

网络自动化引擎(NAE)和网络集成引擎(NIE)是基于网络的、基于以太网的监控设备，用于监视和控制现场级楼宇自动化设备、HVAC设备和照明的网络。图1显示了一个典型的NAE55模型。
本文档主要介绍MS-NAE55xx-x和MS-NIE55xx-x两种型号发动机的安装方法，除非另有说明，以下统称为NAE55。

本设备已经过测试，符合FCC规则第15部分a类数字设备的限制。当本设备在商业环境中运行时，这些限制旨在提供合理的保护，防止有害干扰。
本设备产生、使用并辐射射频能量，如果不按照说明书安装和使用，可能会对无线电通信造成有害干扰。本设备在住宅区使用时，可能会产生有害干扰，用户须自费纠正干扰。

安装
安装NAE55时，请遵循以下原则:
•使用原集装箱运输NAE55，以减少对NAE55的振动和冲击损伤。
•确认所有随NAE55发货的部件。
数据保护电池和NAE55一起发货，但分开包装。
•请勿将NAE55跌落或受到物理冲击。
•请勿打开NAE55外壳(数据保护电池舱除外)。NAE55内部没有用户可维修的部件。部分包括
•1个NAE55
•一个数据保护电池
•安装说明书一份。所需材料和专用工具
•四个适合安装表面的紧固件(M4螺钉-欧洲，#8螺钉-北美)
•两个36厘米(14英寸)或更长的DIN导轨片，仅用于DIN导轨安装应用
•小型直刃螺丝刀，用于固定端子排中的通信导线

MS-NAE5510-3

The Network Automation Engine (NAE) and Network Integration Engine (NIE) are Web-enabled, Ethernet-based, supervisory devices that monitor and control networks of field-level building automation devices, HVAC equipment, and lighting. Figure 1 shows a typical NAE55 model.
This document describes how to install MS-NAE55xx-x and MS-NIE55xx-x model engines, which are referred to collectively as NAE55 unless specified otherwise.

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.

Installation
Follow these guidelines when installing an NAE55:
• Transport the NAE55 in the original container to minimize vibration and shock damage to the NAE55.
• Verify that all the parts shipped with the NAE55.
The data protection battery and NAE55 ship together but are packaged separately.
• Do not drop the NAE55 or subject it to physical shock.
• Do not open the NAE55 housing (except the data protection battery compartment). The NAE55 has no user-serviceable parts inside. Parts Included
• one NAE55
• one data protection battery
• one installation instructions sheet Materials and Special Tools Needed
• four fasteners appropriate for the mounting surface (M4 screws – Europe, #8 screws – North America)
• two 36 cm (14 in.) or longer pieces of DIN rail for DIN rail mount applications only
• a small straight blade screwdriver for securing communication wires in the terminal blocks