NI 9684 NI CompactRIO单板控制器

这sbRIO-9637(零件号:783818-02和783818-01)是一个CompactRIO单板控制器。这sbRIO-9637由开发国家文书。这镍锶钡-9637是CompactRIO原始设备制造商(OEM)设备系列的一员。这镍 sbRIO-9637需要2015年8月或更高版本的NI CompactRIO设备驱动程序软件。这控制器另外还需要几种类型的LabVIEW软件。这sbRIO-9637与NI Linux 32位实时操作系统一起运行，具有完整的功能。

这镍 sbRIO-9637采用Xilinx Zynq-7000 FPGA构建。这sbRIO-9637采用双核处理器制造。的架构sbRIO-9637来源于臂皮层A9。这CompactRIO单板控制器具有512 MB的易失性存储器。这sbRIO-9637还配备了512 MB的非易失性内存。

这国家仪器公司sbRIO-9637有一个RIO夹层卡(RMC)连接器。这镍 sbRIO-9637还具有多种类型的端口，如USB主机端口、CAN端口、DIO端口、MIO端口、SD连接器和以太网端口。这镍 sbRIO-9637配有SDHC端口、一个RS-485串行端口和两个RS-232串行端口。

这sbRIO-9637内置16个模拟输入通道和4个模拟输出通道，ADC分辨率为16位。这sbRIO-9637包含28条3.3 V数字输入/输出线路sbRIO-9637需要外部9 VDC至30 VDC电源。

NI 9684

The sbRIO-9637 (Part Numbers: 783818-02 and 783818-01) is a CompactRIO Single-Board Controller. The sbRIO-9637 is developed by National Instruments. The NI sbRIO-9637 is a member of the family of CompactRIO original equipment manufacturer (OEM) devices. The NI sbRIO-9637 requires the NI CompactRIO Device Drivers software August 2015 or later. This Controller additionally requires several types of LabVIEW software. The sbRIO-9637 operates with full functionality with the NI Linux 32-bit Real-Time operating system.

The NI sbRIO-9637 is built with a Xilinx Zynq-7000 FPGA. The sbRIO-9637 is fabricated with a dual-core processor. The architecture of the sbRIO-9637 is derived from the ARM Cortex A9. This CompactRIO Single-Board Controller is available with a volatile memory of 512 MB. The sbRIO-9637 is also equipped with 512 MB of non-volatile memory.

The National Instruments sbRIO-9637 has a RIO Mezzanine Card (RMC) connector. The NI sbRIO-9637 is additionally featured with multiple types of ports, such as USB host ports, a CAN port, a DIO port, an MIO port, an SD connector, and an Ethernet port. The NI sbRIO-9637 is prepared with SDHC ports, an RS-485 serial port, and two RS-232 serial ports.

The sbRIO-9637 comes with 16 analog input channels and 4 analog output channels with 16-bit ADC resolution. The sbRIO-9637 contains 28 digital input/output lines with 3.3 V. The sbRIO-9637 requires an external 9 VDC to 30 VDC power supply.