NMBC-01 64079760 Modbus连接PCB电路板

Product Description

The 1784-U2CN is a USB-to-ControlNet network interface cable manufactured by Rockwell Automation for connecting a laptop or desktop computer to the ControlNet network using an unused USB port on the computer. Here are some details about the product:

Product name: USB-to-ControlNet Cable, model 1784-U2CN.
Features: Allows connection to the ControlNet network via a USB port on the computer, replacing the 1784-PCC communication card used on computers without a PCMCIA slot.
Power requirements: Supply from a Safe Ultra-Low Voltage (SELV) or Protected Ultra-Low Voltage (PELV) compliant power supply.
Installation: Device drivers need to be downloaded and installed from the Rockwell Automation knowledge base, and if RSLinx Classic software version 2.54 or later is installed on your computer, the drivers are already installed.
Product size:
USB cable length: 0.61 m (2 ft).
Case dimensions: 7.62 cm (3 inches) long, 5.08 cm (2 inches) wide, 2.54 cm (1 inch) thick.
ControlNet NAP Cable length: 3.05 m (10 ft).
Electrical specifications:
Maximum power consumption: 0.5W.
Supply voltage: 5.00V DC to 5.25V DC Max.
Supply current: 75 mA.
Isolation voltage: Continuous 30V, base insulation type, ControlNet to USB test at 500V AC for 60 seconds.
Operating ambient temperature: 0°C to 55°C(32°F to 131°F).
Non-operating ambient temperature: -10°C to 85°C(14°F to 185°F).
Relative humidity: 5% to 95%, non-condensing.
Certification: including c-UL-us, CE, C-Tick and CI ControlNet, in line with industrial control equipment standards in many countries and regions.
Status indicators: The device has status indicators to display the ControlNet network and module status.
Product Life cycle Status: It has been announced that the product will be discontinued after April 1, 2024, and will no longer be sold. Rockwell Automation encourages customers to remove references to the affected products.
Please note that this product is sensitive to electrostatic discharge, which may cause internal damage and affect normal operation. Specific guidelines should be followed when handling the device, such as touching grounded objects to discharge potential static electricity, not touching connectors or pins, and storing the device in appropriate anti-static packaging when not in use.