PXIE-8880 NI 8核PXI控制器 嵌入式PXI Express控制器

这倪PXIe-8880(零件号: 783513-05, 783513-04, 783513-33 和154471B-01L)是一个8核PXI控制器，前板上有一个SMB连接器，可与背板的任何PXI快线连接或从背板的任何快线连接。一个驱动任务过程被期望防止两个资产与一个相似的执行行相关联，这使得触发器激活两次，并且可能损害设备。

这PXIe 8880控制器采用八核英特尔至强E5-2618L v3处理器，提供24 GB/秒系统带宽和8 GB/秒插槽带宽、8 GB (1 x 8 GB DIMM)、三通道1866 MHz DDR4 RAM标准和2.3 GHz。该设备配有1个系统插槽和3个控制器扩展槽。

要重新设计内存，请删除倪PXIe-8880从PXI快车的底盘上。要增强内存限制和框架执行，请使用类似大小和速度的内存模块。每个空间中各种尺寸模块的利用得到了支持，但是框架执行将比利用三个协调模块慢。在任何情况下，三个不匹配的模块都会比使用单个模块执行得更好。

这款嵌入式PXI Express控制器是精英、高通量和计算密集型测试和评估应用的真正选择，例如5G蜂窝查询研究、半导体制造测试、射频记录和回放，以及测试时间和展示时间至关重要的任何应用。NI设备使用NI-DAQmx、NI-VISA、NI模块化仪器和NI-Industrial communication s for ether cat驱动软件运行，这些软件与LabVIEW等软件包/应用开发环境(ade)兼容。LabWindows/CVI，Measurement Studio，Microsoft Visual Basic，Visual Studio。NET，或者Visual C++。

考虑到CPU的多核特性，这种安装的控制器在与针对并行处理而改进的框架计划编程(如LabVIEW和TestStand)结合使用时尤其有价值。四宽3U PXI快速模块重3.4磅。它的推荐工作温度范围为0至50°C，存储温度范围为-40至71°C。该设备具有一个显示端口、2个RJ45、1个USB 4引脚A系列堆叠插座、1个USB 9引脚A系列堆叠插座、一个SMB和一个25引脚Micro D连接器。

PXIe-8880

The NI PXIe-8880 (Part Numbers: 783513-05, 783513-04, 783513-33 and 154471B-01L ) is an 8-Core PXI Controller, with an SMB connector on the front board that can be associated with or from any PXI Express line initiation of the backplane. An actuation task process is expected to keep two assets from associating with a similar enactment line, which makes the trigger activate twofold and perhaps harm the equipment.

The PXIe 8880 Controller offers 24 GB/s of system bandwidth and 8 GB/s slot bandwidth, 8 GB (1 x 8 GB DIMM), triple channel 1866 MHz DDR4 RAM standard, and 2.3 GHz with an eight-core Intel Xeon E5-2618L v3 processor. The device is equipped with 1 system slot and 3 controller expansion slots.

To redesign the RAM, expel the NI PXIe-8880 from the PXI Express chassis. To enhance memory limit and framework execution, utilize a similar size and speed memory modules. The utilization of various size modules in each space is bolstered, however framework execution will be slower than utilizing three coordinated modules. In any case, three mismatched modules could result in better execution over utilizing a single module.

This inserted PXI Express controller is the true decision for elite, high-throughput, and computationally serious test and estimation applications, for example, 5G cellular inquire research, semiconductor creation test, and RF record and playback and in addition any application for which test time and time to showcase are critical. The NI device operates using the NI-DAQmx, NI-VISA, NI Modular Instruments, and NI-Industrial Communications for EtherCAT driver software which are compatible with software packages/application development environments (ADEs) such as LabVIEW. LabWindows/CVI, Measurement Studio, Microsoft Visual Basic, Visual Studio .NET, or Visual C++.

Considering the CPU’s multicore nature, this installed controller is especially valuable when combined with framework plan programming that is improved for parallel processing, such as LabVIEW and TestStand. The four-wide 3U PXI Express module weighs 3.4 lbs. It has a recommended operating temperature range of 0 to 50 °C, and a storage temperature range of -40 to 71 °C. The device has a DisplayPort, 2 RJ45, 1 USB 4-pin series A stacked receptacle, 1 USB 9-pin series A stacked receptacle, a SMB, and a 25-pin Micro D connector.