描述
品牌 | 品名 | 产品型号 | 订货号 |
PROFIBUS | 模块 | UFP11A-00 | |
产地 | 可售卖地 | 是否进口 | 保修期 |
美国 | 全国、国外 | 是 | 一年 |
发货地点 | 发货方式 | 使用方式 | 适用行业 |
厦门 | 顺丰快递 | 调试安装 | 电厂钢厂水泥厂船舶造纸 |
服务优势 | 国外进口 、 备货供应、 | 价格合适、品质可靠 | 图片仅供参考实物为准 |
产品特点 | 一手货源、 按型号供货 | 售后有保障 | 何经理1805988-4797 |
通过使用预安装的DIN导轨安装或在外壳背面钻四个孔,该单元可以直接安装到控制柜的墙壁上。基本上。要连接的单元的空间排列没有限制。MOVITRAC 07)。必须考虑到最大线路长度和网关必须安装在系统总线(SBus)的末端或开始的事实。出于这个原因,我们建议您考虑空间方面
帐户。如果使用DIN导轨安装选项与长度超过1m的SBus电缆一起使用,则UFP必须具有额外的hf兼容接地。UFP11A现场总线接口通过符合en50170的9针sub – D连接器连接到PROFIBUS网络。t总线连接必须使用适当设计的插头来实现。
UFP11A-00
The unit can be installed directly onto the wall of a control cabinet by using the preinstalled DIN rail mounting or the four drilled holes on the back of the housing. Basically.there are no restrictions regarding the spatial arrangement of the units to be connectede.g. MOVITRAC 07). The maximum line length and the fact that the gateway must beinstalled at the end or the beginning of the system bus (SBus) must be taken intoconsideration. For this reason, we recommend you take the spatial aspects into
account.The UFP must have additional HF-compliant grounding if the DIN rail mounting optionis used with SBus cables of more than 1 m in length.The UFP11A fieldbus interface is connected to the PROFIBUS network by means of a9-pin sub D connector in accordance with EN 50170. The T-bus connection must beimplemented with an appropriately designed plug.