VM600 IOC4T 200-560-000-111 200-560-101-017 VIBRO METER IOC4T输入/输出卡

产品细节：VM600 IOC4T 200-560-000-111 200-560-101-017 VIBRO METER IOC4T输入/输出卡

从振动计®产品线
•信号接口卡具有4个动态信号输入和2个转速表(速度)输入，用于MPC4机械保护卡
•螺杆式端子连接器(48个端子)用于所有输入/输出连接
•包含4个继电器，可归因于报警信号，在软件控制下
•32个全可编程开路集电极输出(跳线可选)到IRC4和RLC16继电器卡
•缓冲“原始”传感器信号和模拟输出信号(电压或电流)的振动通道
•所有输入和输出的电磁干扰保护
•实时插拔卡(可热插拔)
•可在“标准”和“独立电路”版本

IOC4T输入/输出卡作为来自梅吉特振动计®产品线的VM600系列MPC4机械保护卡的信号接口。安装在VM600机架的后部，通过两个连接器直接连接到机架背板上。
每个IOC4T卡都与相应的MPC4卡相关联，并直接安装在VM600机架(ABE04x或ABE056)的后面。IOC4T工作在从属模式，并与MPC4通信，通过连接器P2，使用工业包(IP)接口。
IOC4T的前面板(VM600机架的后部)包含端子带连接器，用于连接来自测量链(传感器和/或信号调节器)的传输电缆。螺纹端子连接器也用于从任何外部控制系统输入所有信号并输出所有信号。
IOC4T卡具有所有输入输出防电磁干扰和浪涌保护功能，同时满足EMC (electromagnetic compatibility)标准。
IOC4T将原始动态(振动)和速度信号从传感器连接到MPC4。
这些信号，一旦处理，被传递回IOC4T，并在其前面板(VM600的后方)的终端带上可用。对于动态信号，四个板载数模转换器(dac)提供0至10 V范围内的校准信号输出。此外，四个板载电压-电流转换器允许信号作为电流输出在4至20 mA(跳线可选)范围内提供。

VM600 IOCR2

From the Vibro-Meter® product line
• Signal interface card with 4 dynamic signal inputs and 2 tachometer (speed) inputs, for the MPC4 machinery protection card
• Screw-terminal connectors (48 terminals) for all input/output connections
• Contains 4 relays which can be attributed to alarm signals, under software control
• 32 fully-programmable open-collector outputs (jumper selectable) to IRC4 and RLC16 relay cards
• Buffered “raw” sensor signals and analog output signals (voltage or current) for vibration channels
• EMI protection for all inputs and outputs
• Live insertion and removal of cards (hot-swappable)
• Available in “standard” and “separate circuits” versions

The IOC4T input /output card acts as a signal interface for the VM600 series MPC4 machinery protection card, from Meggitt’s Vibro-Meter® product line. It is installed in the rear of a VM600 rack and connects directly to the rack backplane via two connectors.
Each IOC4T card is associated with a corresponding MPC4 card and is mounted directly behind it in the VM600 rack (ABE04x or ABE056). The IOC4T operates in slave mode and communicates with the MPC4, through connector P2, using an Industry Pack (IP) interface.
The front panel of the IOC4T (rear of the VM600 rack) contains terminal strip connectors for wiring to the transmission cables coming from measurement chains (sensors and /or signal conditioners). The screw-terminal connectors are also used to input all signals from and output all signals to any external control system.
The IOC4T card protects all inputs and outputs against electromagnetic interference (EMI) and signal surges and also meets electromagnetic compatibility (EMC) standards.
The IOC4T connects the raw dynamic (vibration) and speed signals from the sensors to the MPC4.
These signals, once processed, are passed back to the IOC4T and made available on the terminal strip on its front panel (rear of VM600). For the dynamic signals, four on-board digital-to-analog converters (DACs) provide calibrated signal outputs in the range 0 to 10 V. In addition, four onboard voltage-to-current converters allow the signals to be provided as current outputs in the range 4 to 20 mA (jumper selectable).

 联系何经理：

[ 询价电子邮件 ： sales@xiongbagk.cn ]

[ 电话/微信 ： +8618059884797 ]

[ QQ ： 3095989363 ]