VM600 MPC4 200-510-070-113 200-510-111-034 VM600系列机械保护系统(MPS)的核心元件

MPC4机械保护卡是VM600系列机械保护系统(MPS)的核心元件,来自梅吉特的振动仪表产品线。这种非常通用的卡片能够测量和监控多达四个动态信号输入和多达两个速度
同时输入。
动态信号输入是完全可编程的,可以接受表示加速度、速度和位移(接近)等的信号。机载多通道处理允许测量各种物理参数,包括相对和绝对振动,最大偏心,推力位置,绝对和差动外壳膨胀,位移和动压力
数字处理包括数字滤波、积分或微分(如果需要)、整流(有效值、平均值、真峰或真峰对峰)、阶数跟踪(幅度和相位)和传感器测量。

分类:

电话:18059884797 (微信同号)

QQ:3095989363

山西润盛
(加微信咨询)
—————————————————————————
★一手货源,没有中间商赚差价!库存1个亿!
★只要是您想要的,我能帮您找到,价格最优!
★厂家原装,保证售后服务,所有产品质保1年!
————————————————————————— 今日有货

产品详情

VM600 MPC4 200-510-070-113 200-510-111-034 VM600系列机械保护系统(MPS)的核心元件特点:

产品概述

MPC4机械保护卡是VM600系列机械保护系统(MPS)的核心元件,来自梅吉特的振动仪表产品线。这种非常通用的卡片能够测量和监控多达四个动态信号输入和多达两个速度
同时输入。
动态信号输入是完全可编程的,可以接受表示加速度、速度和位移(接近)等的信号。机载多通道处理允许测量各种物理参数,包括相对和绝对振动,最大偏心,推力位置,绝对和差动外壳膨胀,位移和动压力
数字处理包括数字滤波、积分或微分(如果需要)、整流(有效值、平均值、真峰或真峰对峰)、阶数跟踪(幅度和相位)和传感器测量。
速度(转速表)输入接收来自各种速度传感器的信号,包括基于接近探头,磁脉冲拾取传感器或信号传感器的系统。分数转速计也支持。
结构可以用公制或英制单位表示。警报和危险设定值是完全可编程的,因为报警时间延迟。迟滞和锁存。警报和危险等级也可以根据速度或任何外部信息进行调整。
每个警报级别都有一个数字输出(在相应的loc4input /output卡上)。这些报警信号可以驱动lOC4T卡上的四个本地继电器和/或可以使用VM600机架的Raw总线或OpenCollector (OC)总线进行路由,以驱动RLCl6或IRC4等可选继电器卡上的继电器。
经过处理的动态(振动)信号和速度信号可在机架后方(在lOC4T的前面板上)作为模拟输出信号。提供基于电压(0至10 v)和基于电流(4至20 mA)的信号。

MPC4在上电时执行自检和诊断程序。此外,该卡内置的“OK系统”持续监测由测量链(senso!和/或信号调节器),并指示由于传输线断裂、传感器故障或信号调节器引起的任何问题。
MPC4前面板上的LED指示灯用于指示是否发生了处理或硬件错误。六个额外的led(每个输入通道一个)指示OK系统是否检测到故障以及通道上是否发生告警。
MPC4卡有三种版本:“标准”版本,“独立电路”版本和“安全”(SlL)版本,所有这些版本都使用相应的lOC4T输入输出卡作为卡对。
不同版本的MPC4卡
MPC4卡有不同的版本,包括“标准”、“独立电路”和“安全”(SlL)版本。此外,有些版本还可以在卡的电路上涂上一层保形涂层
保护环境不受化学品侵害;
灰尘、湿气和极端温度。
“标准”版本和“安全”版本(SlL)
版本的MPC4卡已通过toEC 61508和lS0 13849认证,用于功能
安全环境,如根据c 61508和PL c符合
S0 13849 – 1
“标准”MPC4卡是原始版本,支持所有功能和处理模式。“标准”MPC4旨在安全
系统使用VM600机架与有限范围的卡,即。“标准”MPC4/ 10c4t卡
配对和RLCló中继卡。它有一个VME-
兼容的从机接口,因此当在WM600机架上有一个cpu作为机架控制器时,它可以通过VME进行软件配置。它也可以通过R$-232(在卡的前面板上)进行软件配置。

200-510-071-113-200-510-111-034-VM600-MPC4

The MPC4 machinery protection card is thecentral element in the VM600 series machineryprotection system (MPS), from Meggitt’sVibro-Metere product line. This very versatile cardis capable of measuring and monitoring up tofour dynamic signal inputs and up to two speed
inputs simultaneously.
The dynamic signal inputs are fully programmableand can accept signals representingacceleration,velocity and displacement(proximity),among others.On-board multi-channel processing allows measurement ofvanous physical parameters,including relativeand absolute vibration, Smax eccentricity, thrustDosition,absolute and differential housingexpansion,displacement and dynamic pressure
Digital processing includes digital filtering.integration or differentiation (if required),rectification (RMS, mean value, true peak or truepeak-to-peak),order tracking(amplitude andphase)and measurement of the sensor-fargeigap.
The speed (tachometer) inputs accept signalsfrom a variety of speed sensors,including systemsbased on proximity probes, magnetic pulse pick-up sensors orILsianals.Fractional tachometerrafios are also supported.
The configuration can be expressed in metric orimperial units. Alert and Danger set points are fullyprogrammable, as are alarm time delay.hysteresis and latching. The Alert and Dangerevels can also be adapted as a function of thespeed or any external infommation.
A digital output is available intemally (on thecorespondinglOC4Tinput/output card) for eachalarmlevel.These alamm signals can drive fourlocal relays on the lOC4T card and/or can berouted using the VM600 rack’s Raw bus or OpenCollector (OC) bus to drive relays on optionalrelay cards such as the RLCl6 or IRC4.
The processed dynamic (vibration) signals andspeed signals are available at the rear of the rack(on the front panel of the lOC4T) as analogoutput signals.Voltage-based (0 to 10 v) andcurrent-based (4 to 20 mA) signals are provided.

The MPC4 performs a self-test and diagnosticroutine on power-up.in addition, the card’s builtin “OK system” continuously monitors the level ofsignals provided by a measurement chain (senso!and/or signal conditioner) and indicates anyproblem due to a broken transmission line, faultysensor or signal conditioner.
An LED indicator on the MPC4 front panelindicates whether a processing or hardware erorhas occurred.Six additional LEDs (one per inputchannell indicate whether the OK System hasdetected a fault and whether an alarm hasoccurred on the channel.
The MPC4 card is available in three versions: a”standard” version,a”separate circuits” versionand a “safety”(SlL) version, all of which functionas a card pair using a corresponding lOC4T input,output card.
Different versions of the MPC4 card
The MPC4 card is available in different versionsincluding “‘standard”,”separate circuits” and’safety”(SlL) versions.In addition, some versionsare available with a conformal coating appliedto the circuitry of the card for additional
environmental protection against chemicals,
dust, moisture and temperature extremes.
Both the ‘standard’ version and the “safety”(SlL)
versions of the MPC4 card are certified toEC 61508 and lS0 13849, for use in functional
safety contexts,such as SlLlin accordance withEC 61508 and PL c in accordance with
S0 13849-1
The “standard” MPC4 card is the original versionand supports all features and processing modesThe “standard” MPC4 is intended for safety
systems using a VM600 rack with a limited rangeof cards, that is.”standard” MPC4/l0C4T card
pairs and RLCló relay cards. lt has a VME-
compatible slave interface so it is softwareconfigurable via VME when there is a CPUx cardacting as a rack controllerin the WM600 rack. lt isalso software configurable via R$-232 (on the frontpanel of the card).

其他相近型号:VM600 MPC4 200-510-070-113 200-510-111-034 VM600系列机械保护系统(MPS)的核心元件

PXIe-1073 NI PXI机箱is220pdiah1be 336A5026ADP4电阻温度器件(RTD)输入模块GE
F860-CA霍尼韦尔C系列现场总线接口模块is420eswbh3ax GE模拟I/O模块
DSSA165 ABB交流电源模块516tx 336A4940DNP516TX GE 516TX-A工业以太网交换机
125840-02 Bently电源模块128277-01未来扩展面板Bently Nevada
125680-01弯曲位移检测模块a413139 PC板电路板模块组装美卓
BENTLY Communication模拟输出模块d201471 Metso RT节点PC AP31 D200137个性模块
125800-01本特利内华达关键相输入/输出模块a413188 PC板电路板模块组装美卓
140471-01 Bently内华达州开发的I/O模块与内部终端a413331 PC板电路板模块组装METSO
3500/22M 138607-01 Bently检测器模块d201466 Metso RT节点PC AP31 D200137个性模块
显示模块85uvf1a – 1qd Fireye集成火焰扫描仪与内部火焰继电器
3500/42M 176449-02弯曲内华达轴振动模块516tx 336A4940DNP516TX GE A微处理器器件
316tx – 336a4940dnp516tx GE微控制器
Bently Nevada通信网关模块2mlr – cput HONEYWELL CPUHT总线功能
3500/92-03-01-00 Bently NEVATA振动监测模块
7264 ABB四通道SSI接口模块具有自动pxie -6556 NI自动工业控制模块

本篇文章出自厦门雄霸电子商务有限公司漳州分公司官网,转载请附上此链接: http://www.xiongbagk.cn/

雄霸