VPL-B1003T-PJ14AA
The VPL-B1003T-PJ14AA is a rotary servo motor from the Kinetix VPL series. This servo motor is the actuating component of a motion control system, driven by a servo drive, specifically, a Kinetix 5500 or Kinetix 5700 multi-axis drive. This Servo Motor has an environmental protection rating of IP50 which can be increased up to IP65 upon the use of the appropriate optional shaft seal and environmentally sealed cables. The VPL-B1003T-PJ14AA operates at 460 VAC, 3-Phase voltage supply, and comes with an integral 24 VDC holding brake. It also has a frame size measuring 100 mm bolt circle diameter (BCD), 3-inch Magnet stack, rated speed of 6750 RPM, and maximum operating speed of 7000 RPM. For Kinetix drive position feedback, an 18-bit, the multi-turn digital absolute encoder is installed along with this servo motor. This encoder supports Hiperface protocol utilized for faster data exchange between the drive and the encoder. Incoming motor connections are made using the Single SpeedTec DIN connector in right-angle orientation which can be rotated up to 325 Degrees. This type of connector provided increased tolerance against shock, vibration while providing a fast installation method. This servo motor is also compatible using Allen-Bradley’s 2090 Cabling technology. This servo motor is ideal for installation in a variety of industrial applications particularly Packaging, Converting, Material handling, Electronics assembly, Automotive, and similar applications. It exhibits lo-inertia output, high Torque to size ratio, and is built with high-energy rare-earth magnets. This servo motor is specifically a Brushless AC Synchronous Servo Motor that comes with UL Recognized components to applicable UL and CSA standards as well as CE marked for all applicable directives.
The VPL-B1003T-PJ14AA is a VPL low inertia servo motor series manufactured by Allen Bradley. This low inertia servo motor comes as a rotary servo motor component type with flange mounting type. The motor comes with a braking system that is rated as a 24 Volts DC featuring the standard factory option. The module comes with the IEC metric or the free mounting hole which is also classified as a type FF. The connector type for the VPL-B1003T-PJ14AA is Single Speed TEC DIN connector with a right angle 325 degrees rotatable connector. The VPL-B1003T-PJ14AA comes with the smooth shaft key with feedback type being an 18 bit absolute multi-turn digital encoder or the Hiperface DSL protocol. The VPL-B1003T-PJ14AA features an operating temperature of 40 degrees Celsius to the maximum with a minimum operating temperature of 0 degrees Celsius.
The VPL-B1003T-PJ14AA also comes with storage temperature being a minimum of -30 degrees Celsius with a maximum of 40 degrees Celsius as the storage maximum temperature. The module also features a relative humidity of 5 to 95% non condensing and belongs to the voltage class of 400 Volts. The VPL-B1003T-PJ14AA also comes with a real-time motor performance providing the information to the control system through a digital feedback device. The motor has also been optimized to ensure that it matches the drive ratings and also to allow for an efficient system sizing. The servo motors come available in 9 frame sizes and they offer a torque rating of 0.46 to 33.0 N-m based on the proven magnetic core MP technology.
