1783-BMS10CGN 1783-BMS20CGN 托管以太网交换机

它由外部24伏直流电源供电，功耗为15瓦@ 24伏DC/ 40摄氏度（104华氏度），最大功耗为20瓦。它的功耗为20瓦。1783-BMS10CGN配有一个集成的报警继电器，其触点额定值在30V DC时为1 A，在48V DC时为0.5 A。

支持千兆以太网（GE）的组合端口可以安装小型可插拔（SFP）收发器，用于光纤层。它还可以安装1784 SD1，用于保存以太网交换机的配置，并方便地将配置传输到其他类似的受管以太网交换机。

对于以太网连接，推荐的电线组件是符合IEC 60603-7标准的RJ45连接器和符合TIA 568-B.1标准的两（2）对或四（4）对5e类最小电缆或符合ISO/IEC 24702标准的5类电缆。对于警报继电器的端接信号线，建议电线尺寸为0.5-0.8平方毫米。或20-18 AWG单股或多股、UL/CSA评级的1007或1569型双绞线铜设备布线材料（AWM）电线，6.3毫米（0.25英寸。0.5毫米（0.02英寸。）条带长度。对于DC电源连接，合适的电线尺寸为0.5…0.8平方毫米。或20-18 AWG实心或绞合铜线，绝缘等级为75°C（167°F）或更高，最大绝缘厚度为1.2毫米（3/64英寸）。），条带长度为6.3毫米（0.25英寸。0.5毫米（0.02英寸。).

1783-BMS10CGN交换机上共有10个端口。其中八个端口是铜质（RJ-45）端口，它们支持快速以太网。其中两个端口是组合端口，它们支持铜缆和光纤连接。组合端口支持的网络速度是千兆以太网。1783-BMS10CGN交换机采用开放式外壳，其额定温度符合T4北美温度标准。1783-BMS10CGN交换机的重量和尺寸分别为3.05磅和5.1 x 3.6 x 5.345英寸。1783-BMS10CGN开关适用于12至48伏DC的DC输入电压。开关的电流消耗范围为0.5至2安培。1783-BMS10CGN交换机的典型功耗为15瓦，最高可达20瓦。交换机可以承受的最高环境温度为60摄氏度。在较高的环境温度下，开关性能会下降，开关也会损坏。

1783-BMS10CGN

It is powered by an external 24VDC supply voltage with a power consumption of 15 Watts @ 24V DC/ 40 °C (104 °F) with maximum consumption of 20 Watts. It has a power dissipation of 20 Watts. The 1783-BMS10CGN has an integrated alarm relay with contact rating of 1 A @ 30V DC or 0.5 A @ 48V DC.

The combo ports which supports Gigabit Ethernet (GE) may be installed with Small Form-factor Pluggable (SFP) transceiver, used for fiber-optic layer. It may also be installed with a 1784-SD1, used for saving the ethernet switch’ configuration and convenient transfer of configuration to other similar managed ethernet switch.

For Ethernet connection, recommended wire assembly is RJ45 connector according to IEC 60603-7 and Two (2) or Four (4) pair Category 5e minimum cable according complying to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702. For terminating signal wires to the alarm relay, recommended wire size is 0.5-0.8 mm. sq. or 20-18 AWG solid or stranded, UL/CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire, 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.) strip length. For DC power connection, appropriate wire size is 0.5…0.8 mm sq. or 20-18 AWG solid or stranded copper wire with insulation rating of 75 °C (167 °F) or greater, and maximum insulation thickness of 1.2 mm (3/64 in.) with strip length of 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.).

There are a total of 10 ports on the 1783-BMS10CGN switch. Eight of these ports are copper (RJ-45) ports and they support Fast Ethernet. Two of the ports are combo ports and they support both copper and fiber connectivity. The network speed supported by the combo ports is Gigabit Ethernet. The 1783-BMS10CGN switch comes in an open enclosure which is rated with the T4 North American temperature code. The weight and dimensions of the 1783-BMS10CGN switch are 3.05 pounds and 5.1 x 3.6 x 5.345 inches, respectively. The 1783-BMS10CGN switch works with DC input voltages between 12 and 48 Volts DC. The current consumption of the switch ranges from 0.5 to 2 Amps. The typical power consumption of the 1783-BMS10CGN switch is 15 Watts which can go up to a maximum of 20 Watts. The maximum ambient temperature which the switch can tolerate is 60 degrees Celsius. At higher ambient temperatures, the switch performance will degrade and the switch can also be damaged.