3500/15 125840-01 3500/15系列电源模块

特点:
半高的模块
3500系列机架可包含一个或两个电源
(3)生产版本

Bently Nevada 3500/15系列电源模块为半高模块，必须安装在机柜左侧专门设计的槽位中。3500机架可以包含一个或两个电源(交流和/或直流的任意组合)，任何一个电源都可以为整个机架供电。如果安装了，第二个电源将作为主要电源的备份。当机架内安装双电源时，下槽位的电源作为主电源，上槽位的电源作备电源。只要安装了备用电源，插拔任意一个电源模块都不会影响机架的正常运行。

3500电源接受广泛的输入电压，并将其转换为其他3500模块可接受的电压。3500系列机械保护系统提供三种电源版本，如下:2.交流电源高压直流电源低压直流电源。

3500/15电源模块为半高模块，必须安装在机柜左侧的指定槽位上。3500rack支持单路或双路交流电源和直流电源的任意组合。任何一种电源都可以为整个机架供电。
当机架内安装两个电源时，下槽位的一个作为主电源，上槽位的另一个作备用电源。安装完毕后，第二个电源是主电源的备用电源。
只要安装了备用电源，插拔任意一个电源模块都不会影响机架的正常运行。
3500/15电源接受广泛的输入电压，并将其转换为其他3500模块可接受的电压。以下电源可与3500系列机械保护系统配套使用:
传统交流电源
通用交流电源
高压直流电源
低压直流电源

125840-01

The Bently Nevada 3500/15 Series Power Supplies are half-height modules and must be installed in the specially designed slots on the left side of the rack. The 3500 rack can contain one or two power supplies (any combination of ac and/or dc) and either supply can power a full rack. If installed, the second supply acts as a backup for the primary supply. When two power supplies are installed in a rack, the supply in the lower slot acts as the primary supply and the supply in the upper slot acts as the backup supply. Removing or inserting either power supply module will not disrupt operation of the rack as long as a second power supply is installed.

The 3500 Power Supplies accept a wide range of input voltages and converts them to voltages acceptable for use by other 3500 modules. Three Power Supply versions are available with the 3500 Series Machinery Protection System as follows: 1. ac Power Supply, 2. High Voltage dc Power Supply 3. Low Voltage dc Power Supply.

The 3500/15 Power Supply is a half-height module and must beinstalled in designated slots on the left side of the rack. The 3500rack can contain one or two powersupplies with anycombinations of AC and DC. Either supply can power a full rack.
When two power supplies are installed in a rack, the one in thelower slot acts as the primary supply, and the other in the upperslot acts as the backup supply.lfinstalled, the second supply isthe backup for the primary one.
Removing orinserting either power supply module does notdisrupt operation of the rack as long as a second power supplyis installed.
The 3500/15 Power Supply accepts a wide range of inputvoltages and converts them to voltages acceptable for use byother 3500 modules.The following power supplies are availablewith the 3500 Series Machinery Protection System:
Legacy AC Power
Universal AC Power
High Voltage DC Power supply
Low Voltage DC Power Supply