3500/93 135785-02 3500/93系列系统显示器

特点:
3500机械保护系统的本地或远程视觉指示
(4)显示器安装类型
每3500个机架最多(2)个显示器

GE / bent利内华达州3500/93系列系统显示器旨在满足美国石油协会标准670的要求，并提供位于机架中的所有3500机械保护系统信息的本地或远程视觉指示，包括:系统事件列表，报警事件列表和所有通道，监视器，继电器模块，关键相量模块或测速模块数据。

3500/93系统显示通过3500机架配置软件进行配置。显示器可以安装在任何四种方式:面安装，19英寸EIA机架安装，面板安装和独立安装。

每个3500机架最多可连接两个显示器，每个显示器需要一个空的3500机架槽位来插入相应的DIM。当显示器不是正面安装时，DIM和显示器之间的电缆连接可以从3500机架的前部或从机架后部的I/O模块连接。

面板安装-显示器安装在位于同一机柜或距离3500系统100英尺远的面板开孔中。(当使用外部电源时，距离3500系统高达4000英尺)。
独立安装-显示器安装在墙壁或面板上，距离3500系统高达100英尺。(当使用外部电源时，距离3500系统高达4000英尺)。
每个3500机架最多可以连接两个显示器，每个显示器需要一个空的3500机架插槽来插入相应的DlM。当显示器不是正面安装时，DlM和显示器之间的电缆连接可以从3500机架的前部或从机架后部的输入/输出模块连接。
需要超过100英尺电缆的应用必须使用外部电源和电缆适配器。使用背光显示单元的应用必须使用外部电源。有两个外部电源:一个用于连接到115 Vac和另一个用于连接到230 Vac。
外部电源/端子排安装套件简化了外部电源的安装。该ExtemalPowerTerminal带状安装套件的设计适合于独立安装外壳。该套件简化了外部电源在独立安装外壳或用户提供的外壳中的安装。

3500/93-03-00-00

The GE / Bently Nevada 3500/93 Series System Display is designed to meet the requirements of American Petroleum Institute Standard 670 and provide local or remote visual indication of all 3500 Machinery Protection System information residing in the rack including: system event list, alarm event lists and all channel, monitor, relay module, Keyphasor module or Tachometer Module data.

The 3500/93 System Display is configured using 3500 Rack Configuration Software. The display can be mounted in any of four ways: face mounting, 19-inch EIA rack mounting, panel mounting, and independent mounting.

Up to two displays can be connected to each 3500 rack and each display requires one empty 3500 rack slot for insertion of its corresponding DIM. When the display is not face-mounted, the cable connection between the DIM and the Display can be made from the front of the 3500 rack or from the I/O module at the rear of the rack.

Panel Mounting -display is mounted in a panelcutout located in the same cabinet or up to 100feet away from the 3500 System. (Up to 4000 feetaway from the 3500 System when using theExtemal Power Supply).
Independent Mounting -display is mountedflush against a wall or panel and located up to 100feet away from the 3500 System. (Up to 4000 feetaway from the 3500 System when using theExtemal Power Supply).
Up to two displays can be connected to each 3500 rackand each display requires one empty 3500 rack slot forinsertion of its corresponding DlM. When the display is notface-mounted, the cable connection between the DlM andthe Display can be made from the front of the 3500 rack orfrom the l/O module at the rear of the rack.
Applications that require a cable longer than 100 feet mustuse the External Power Supply and Cable Adapter.Applications that use the back lighted Display Unit mustuse the External Power Supply. There are two ExternalPower Supplies: one for connection to 115 Vac and theother for connection to 230 Vac.
The External Power/Terminal Strip Mounting Kit easesinstallation of External Power Supplies. The ExtemalPowerTerminal Strip Mounting Kit is designed to fit in theIndependent Mount Housing. The Kit streamlinesinstallation of an External Power Supply in both theindependent Mount Housing or a user supplied housing.