ACP1034CD 插座和Powertite™插头

ACP1034CD

• Locations where receptacles are used with stationary or portable electrically operated devices such as:
— Lighting systems
— Conveyors
— Heaters
— Motor-generator sets
— Air conditioners
— Compressors
— Pumps
• Locations where damp or corrosive conditions exist
•  Class I: classified locations such as:
— Petrochemical plants
— Petroleum refineries
— Paint and chemical plants
— Any location where ignitable vapors or gases are present
• Class II: classified locations such as:
— Process industries where there are dust hazards from handling such products as flour, grain and starch or any location where ignitable amounts of dust are present or amounts which would adversely affect performance

• Large housing provides ample wiring room.
• Style 2 (shell and extra pole) grounding.
• Spring door keeps dust out of receptacle when plug is not in use.
• Brass contacts exert constant pressure along entire contact surface and provide superior electrical contact.
• Contacts have beryllium copper wire springs.
• Insulators provide superior dielectric and mechanical strength and lowest arc tracking.
•  Tapped NPT conduit openings at top and bottom: 30 Amp 3/4”, 60 Amp 1-1/2”, 100 Amp 2”.
• “Interlocked” Disconnect Switch” provides safe connect and disconnect operation at 30, 60 or 100 Amp, 600 Vac maximum, three pole, non-fused motor circuit switch. FSQC permits safe operation in Class I, Group B as well as Class I, Groups C and D, Class II, Groups F, G, and Class III.
•  To operate, insert plug and turn receptacle face to “ON” position. To remove plug, turn to OFF position and pull plug out.
•  ACP Powertite™ Series plug fits hazardous location FSQC receptacles.
•  Both flip and screw covers are provided.