AFV30D-S41251 AFV30S AFV30D 现场控制单元 双工现场控制单元

本指南介绍了设备的硬件规格
现场控制单元(FCU)是系统的核心
现场控制站(FCS)的控制功能。
AFV30，AFV40，ACB51, ANB10，ANB11等
ANT10U也可以通过组合
底板及各模块。参考“前io系统”
(GS 33J60A10-01EN)。
n标准规格
确认安装规范和环境
系统共有的条件，请参阅“集成”
CENTUM VP生产控制系统
(GS 33J01A10-01EN)。
l掉电时的内存保护
电池
主存储器电池备份:最多72小时
电池充电时间:至少48小时
l ready触点输出
2个端子(NC、C)
FCU故障时接触点断开
接触额定值:30v DC，最大。0.3
注:当输入option code /HKU时，将从HKU (House Keeping Unit)输出FCU故障触点。
l通信接口
Vnet/IP接口:双冗余
有关详细信息，请参阅“集成生产控制系统CENTUM VP系统概述”(GS 33J01A10-01EN)。
l港大界面(可选)
当指定option code /HKU时，从HKU输出FCU故障触点。还有，环境条件
通过HK总线和光ESB总线连接的机柜，可以监控HKU的运行状态
可以在HIS上显示。系统告警也可以显示。
我没有。节点单元可连接
马克斯。13名学生
可配置的ESB总线节点单元(ANB10)和光纤ESB总线节点单元(ANB11)的总数
连接FCU的个数不超过13个。
l模块配置
电源模块(PW481 / PW482 / PW484): 2个模块，双冗余配置。
处理器模块(CP471或CP461): 2个模块，双冗余配置。
通过使用两个具有相同型号代码(CP471或CP471)的相同模块，可以启用双冗余配置
CP461)。
I/O模块(*1):最多8个

AFV30D-S41252/HKU

This GS covers the hardware specifications of the
Field Control Unit (FCU) which is the core of the
control function of the Field Control Station (FCS).
AFV30, AFV40, ACB51, ANB10, ANB11 and
ANT10U can also be constructed by combining the
Base Plate and each module. Refer to “FIO System
Overview” (GS 33J60A10-01EN).
n STANDARD SPECIFICATIONS
For the installation specifications and the environmental
conditions common to the systems, refer to “Integrated
Production Control System CENTUM VP System
Overview” (GS 33J01A10-01EN).
l Memory Protection During Power Failure
Battery
Battery Back-up for Main Memory: Max. 72 hours
Battery Recharge Time: Min. 48 hours
l READY Contact Output
2 terminals (NC, C)
Contact Points open during FCU failure
Contact Rating: 30 V DC, max. 0.3 A
Note: When option code /HKU is specified, a FCU fault contact is output from the House Keeping Unit (HKU).
l Communication Interface
Vnet/IP Interface: Dual-redundant
For more details, refer to “Integrated Prodction Control Systrm CENTUM VP System Overview” (GS 33J01A10-01EN)
l HKU Interface (Option)
When option code /HKU is specified, a FCU fault contact is output from the HKU. Also, the environmental conditions
of the cabinet connected via the HK bus and optical ESB bus can be monitored and the operating status of the HKU
can be displayed on the HIS. System alarms can also be displayed.
l No. of Node Units Connectable
Max. 13/FCU
The total number of ESB Bus Node Units (ANB10) and Optical ESB Bus Node Units (ANB11) that can be
connected to FCU are 13 or less.
l Module Configuration
Power Supply Module (PW481, PW482, or PW484): 2 modules for dual-redundant configuration.
Processor Module (CP471 or CP461): 2 modules for dual-redundant configuration.
A dual-redundant configuration is enabled by using 2 identical modules with same model code (CP471 or
CP461).
I/O Module (*1): Max. 8