DCF506-0140-51 DCS 500B是一种电枢转换器

DCF506-0140-51

The matrix below indicates all available product documentation and its corresponding order numbers on its left columns as well as all existing DC Drive systems on its top rows. System descriptions, Technical data and Operating instructions (as far as they are available for the corresponding drive) are the basic documents and will be delivered together with each drive. All other documentation has to be ordered separately

General remarks
The term “DCS thyristor power converter” is a general designation for basic DC converters from ABB. This term can be found in many parts of the relevant documentation. The precise product name in accordance with the brief descriptions given below characterizes a specific unit.
Brief description of DCS 500B
The DCS 500B unit range is an enhancement developed from the DCS 500 range.
The DCS 500B is an armature converter with the following standard features:
• Design and commissioning tools • Monitoring functions • Communication via databus • Human-machine interface • More than 300 additional functions blocks programmable under Windows • Graphical Application Designer • Plain text display • FOR HIGH POWER Brief description of DCF 500B
With software release 21.232 or higher DCS 500B has a ‘3-phase field exciter mode’. A DCF 500B is a threephase field exciter based on the programmable DCS 500B software and the SDCS-CON-2 control board.
The interface board PIN-1x is modified; – an overvoltage protection unit DCF 505/506 is required. Brief description of DCS 600
The DCS 600 converter family is based on the hardware developed for the DCS 500B type.
Instead of a COM-x board, the SDCS_AMC_DC board is used. PC tools will be connected there, as well as the APC (Application controller), if the APC is used as a PLC. If a different PLC is used, separate adapter modules are needed. They must be connected to the AMC-DC board, too. The software code always begins with S15.xxx for MultiDrive or S18.xxx for Crane drives.
Brief description of DCF 600
The DCF 600 unit range is intended to be used for supplying motor fields and is based on the hardware and system configuration of the DCS 600 unit. The software is identical to the DCS 600 software. Similar to DCF 500B units the DCF 505/506 overvoltage protection unit is required. The same modification is applied to the PIN-1x board, compared to DCF 500B.
Brief description of DCS 400
The DCS 400 is the smallest drive in its class. The compact design has been partly achieved by a fully integrated field exciter based on IGBT technology. A commissioning wizard – available on the control panel and the PC tool – makes start-up of the drive easy. In addition, the DCS 400 contains application macros.

Mounting the converter module A5 inside an enclosure
Two supports should be mounted inside the enclosure in such a way, that they can carry the converter’s weight when placing the converter later on. The minimum distance between the supports should not be less then 480 mm because of electrical clearance (DC busbars).
A L-shape support as indicated will allow to place the converter temporarily close to the front end of the support (weight still taken by a lifting device) and then push it back to the back plate of the enclosure. The upper and lower holes in the back plate of the converter should be used to fix the converter in that position.