DS200DTBBG1AAA   数字接触端子板

Product description

The digital contact terminal board DS200DTBBG1AAA, manufactured by General Electric and part of the Mark V series, has two terminal boards that can connect up to 95 wires. The unit also features five jumpers and two 2-pin connectors. The terminal board connects the signal wires that send and receive information used by the driver. The GE digital contact terminal board DS200DTBBG1AAA can connect up to 190 wires, so you must be aware of possible damage to other components and circuit boards. The screwdriver is used to loosen the terminal to remove the wire, which means it could hit or scratch other components when unloading. To prevent this from happening, point the screwdriver with one hand at the terminal you want to release.

When you remove the signal wires from the DS200DTBBG1AAA, try to move them to the side without blocking the other boards. If possible, reinstall the signal cable before installing the replacement board to reduce the chance of damaging the fragile board in the drive. If you can connect wires, hold the board only from the side and use both hands. Carefully place the motherboard into the cabinet and align these holes with the holes in the rack where the motherboard is mounted. When replacing it, it is necessary to wear a wristband and attach the end of the wristband to an unpainted metal structure.

When connecting the DS200DTBBG1AAA model to other models in the Mark V DS200 series, four connections are used. Available connections are J12, JQR, JQS/T and JY; All of these connections have specific functions. For example, although JQS/T connectivity is provided on the board, it is rarely used.