IC695ETM001 IC695ETM001-JY 以太网接口模块

以太网接口模块IC695ETM001用于将PACSystems RX3i控制器连接到以太网。它使RX3i控制器能够与其他PACSystems设备以及90系列和VersaMax控制器进行通信。以太网接口提供与其他plc、运行主机通信工具包或编程软件的主机以及运行TCP/IP版本编程软件的计算机之间的TCP/IP通信。这些通信使用GE Fanuc SRTP和以太网全球数据(EGD)协议，通过四层TCP/IP (Internet)堆栈。
RX3i以太网接口的特点包括:
以太网接口实现了1类和2类设备的功能。
▪完整的PLC编程和配置服务。使用WinLoader软件实用程序从PLC CPU升级固件。WInLoader与以太网接口软件的任何更新一起提供。
使用以太网全局数据(EGD)进行周期性数据交换。
▪EGD命令读写PLC和EGD通过网络交换内存。
▪使用SRTP的TCP/IP通信服务。
内置工作站管理器，用于在线监控访问以太网接口。专用站管理器端口。
两个自传感10BaseT / 100BaseTX RJ-45屏蔽双绞线以太网端口，直接连接到10BaseT或100BaseTX IEEE 802.3网络，无需外部收发器。网络中只有一个接口(只有一个以太网MAC地址和IP地址)。
▪内部网络交换机具有自动协商，感应，速度和交叉检测。
内置以太网重启按钮，手动重启以太网固件，无需系统断电。
▪led:以太网OK, LAN OK，日志空，单个端口活动和速度led。
有关此模块的更多信息，请参阅以下出版物:
– TCP/IP以太网通信的PACSystems, GFK-2224
– PACSystems TCP ip通信，站管理器手册，GFK-2225
– PACSystems RX3i系统手册，GFK-2314

IC695ETM001-JY

The Ethernet Interface Module, IC695ETM001, connects a PACSystems RX3i controller to an Ethernet network. It enables the RX3i controller to communicate with other PACSystems equipment and with Series 90 and VersaMax controllers. The Ethernet Interface provides TCP/IP communications with other PLCs, host computers running the Host Communications Toolkit or programmer software, and computers running the TCP/IP version of the programming software. These communications use the GE Fanuc SRTP and Ethernet Global Data (EGD) protocols over a four-layer TCP/IP (Internet) stack.
Features of the RX3i Ethernet Interface include:
▪ The Ethernet Interface implements the capabilities of a Class 1 and Class 2 device.
▪ Full PLC programming and configuration services. Firmware upgrades from the PLC CPU using the WinLoader software utility. WInLoader is supplied with any updates to the Ethernet Interface software.
▪ Periodic data exchange using Ethernet Global Data (EGD).
▪ EGD Commands to read and write PLC and EGD exchange memory over the network.
▪ TCP/IP communication services using SRTP.
▪ Built-in Station Manager for on-line supervisory access to the Ethernet Interface. Dedicated Station Manager port.
▪ Two auto-sensing 10Base T / 100Base TX RJ-45 shielded twisted-pair Ethernet ports for direct connection to either a 10BaseT or 100BaseTX IEEE 802.3 network without an external transceiver. There is only one interface to the network (only one Ethernet MAC address and only one IP address).
▪ Internal network switch with Auto negotiate, Sense, Speed, and crossover detection.
▪ Recessed Ethernet Restart pushbutton to manually restart the Ethernet firmware without power cycling the system.
▪ LEDs: Ethernet OK, LAN OK, Log Empty, individual port activity and speed LEDs.
For more information about this module, please refer to the following publications:
▪ TCP/IP Ethernet Communications for PACSystems, GFK-2224
▪ PACSystems TCP’IP Communications, Station Manager Manual, GFK-2225
▪ PACSystems RX3i System Manual, GFK-2314