IC697CPX928-FE 90-70系列中央处理器(CPU)模块

IC697CPX928-FE 90-70系列中央处理器(CPU)模块是一个特定的电子部件或模块，通常用于计算机或微处理器系统中。

具体来说，这个模块可能包含一个或多个中央处理器（CPU），这些处理器负责执行计算机的各种任务，如数据计算、控制输入输出、运行程序等。

• 所属系列：该模块属于GE Fanuc 90-70系列，可与各种选件模块配合使用，以增强CPU并为其提供额外的功能。
• 处理器：采用80486DX4微处理器，速度为96MHz。
• 内存：配备6MB电池备份RAM的板载存储器和256KB非易失性用户闪存，其中还存储了CPU固件。
• 数据处理能力：能够处理最多12K任意组合的输入和输出，以及高达8K的模拟输入和输出。支持32位浮点数据。
• 配置方式：使用编程软件进行配置，没有用于硬件参数设置的跳线端子或DIP开关。
• 通信端口：配备了一个RS232串行端口，两个RS485串行端口和一个出厂重置端口。
• 运行环境：在32至140华氏度的环境温度下运行，在没有强制风冷的情况下，其工作温度范围为32到122华氏度之间。

IC697CPX928HF

The IC697CPX928-FE 90-70 series Central Processing Unit (CPU) module is a specific electronic component or module commonly used in a computer or microprocessor system.

Specifically, this module may contain one or more central processing units (cpus), which are responsible for performing various tasks of the computer, such as calculating data, controlling input and output, running programs, and so on.

The IC697CPX928-FE is a central processing unit (CPU) module in the GE Fanuc 90-70 series. Primarily used to execute user programs downloaded into CPU memory, the module has 6MB of battery-powered memory and 256KB of non-volatile user flash memory, a processor speed of 96MHz, and a Boolean function execution time of 0.4µs per session.

Equipped with an RS232 serial port, two RS485 serial ports, and a factory reset port, the module is capable of handling any combination of inputs and outputs up to 12K, as well as analog inputs and outputs up to 8K, and supports 32-bit floating point data.

With 70CFM of forced air cooling, the module can operate at ambient temperatures from 32 to 140 degrees Fahrenheit; In the absence of forced air cooling, its operating temperature range is between 32 and 122 degrees Fahrenheit. The module requires one slot in the GE Fanuc 90-70 series PLC rack for installation and comes with three serial ports, two of which support RS-485 communication and one supports RS-232 communication.
The differences between IC697CPX928 and other CPU modules are as follows:
Series: This module belongs to the GE Fanuc 90-70 series and can be used with various option modules to enhance the CPU and provide it with additional functionality.
Processor: Using 80486DX4 microprocessor, the speed is 96MHz.
Memory: Onboard memory with 6MB of battery backup RAM and 256KB of non-volatile user flash memory, where the CPU firmware is also stored.
Data processing capability: Capable of handling arbitrary combinations of inputs and outputs up to 12K, and analog inputs and outputs up to 8K. Supports 32-bit floating point data.
Configuration: Using programming software for configuration, no jumper terminals or DIP switches for hardware parameter Settings.
Communication port: Equipped with one RS232 serial port, two RS485 serial ports and one factory reset port.
Operating environment: Operating at ambient temperatures of 32 to 140 degrees Fahrenheit, with an operating temperature range of 32 to 122 degrees Fahrenheit without forced air cooling.
Different CPU modules may differ in terms of functions, performance and application scenarios, and you can choose the right module according to your specific needs.