IC754VSI12CTD-HH QuickPanel+操作界面

第1章。介绍

QuickPanel+操作界面是一个一体化的微型计算机设计最大的灵活性。该设计基于先进的ARM核心微处理器，将高分辨率触摸屏操作界面与各种通信选项结合在一起。您可以通过QuickPanel+通信端口连接到大多数工业设备。QuickPanel+配备了几种内存类型，以满足最苛刻的应用程序。512MB的DRAM被分为操作系统、对象存储和应用程序内存。256MB的非易失性闪存作为虚拟硬盘，分为操作系统和应用程序的持久存储。保留内存由512KB电池支持的SRAM组成，用于数据存储，在电源故障期间保护您的宝贵数据。

2.3.1连接输入电源

1. 确保电源线未通电，QuickPanel+单元未打开。
2. 松开配合电源连接器上的螺丝夹
3. 将电源线的绝缘层剥去。
4. 注意极性，将电源线固定在配合接头上，拧紧螺钉夹。
连接螺丝的扭矩为0.31 Nm。
5. 将直流电源输入本机。
在正常上电和操作时，快速面板状态LED显示为:
快速面板+单元启动时呈纯琥珀色
正常运行时绿色常亮
6. 一旦电源被应用，QuickPanel+开始初始化。首先出现在显示器上的是开机画面。
若要跳过运行“启动”文件夹中包含的任何程序，请轻按“不运行启动程序”。
7. Microsoft Windows Embedded Compact 7操作系统自动启动。在启动过程中，您应该看到正常的操作系统启动显示。
要在线激活操作系统，您需要首先配置以太网设置，以便在网络上进行操作，如“初始配置”中所述。
您可以在QuickPanel+背面的Microsoft证书真品标签上找到操作系统产品密钥。

FTP服务器

QuickPanel+中包含的FTP服务器支持标准(RFC 959)。不支持SFTP和隐式FTPS，两者使用不同的端口，基于SSH而不是SSL。
FTP服务器的配置是通过快速面板+安装工具完成的。缺省情况下，未启用该服务器。一旦启用，后台程序将运行，等待客户端连接。最多支持10个连接。空闲时间超过5分钟的会话将被服务器终止。

服务器支持:

■操作不安全。所有信息(包括用户名、密码和数据)都不加密传输，容易受到包嗅探和各种FTP攻击。

IC754VSI12CTD-HH

Chapter 1.Introduction

The QuickPanel+ operator interface is an all-in-one microcomputer designed for maximumflexibility. The design, based on an advanced ARM core microprocessor, brings together ahigh-resolution touch-screen operator interface with a variety of communications options. Youcan connect to most industrial equipment through the QuickPanel+ communications ports.The QuickPanel+ is equipped with several memory types to satisfy the most demandingapplications. A 512MB section of DRAM is split between the operating system, an objectstore and application memory. Functioning as a virtual hard drive, a 256MB section of non-volatile flash memory is divided between the operating system and persistent storage forapplication programs. The retentive memory consists of 512KB of battery-backed SRAM fordata storage, protecting your valuable data during a power failure.

2.3.1 Connecting Input Power

1. Make sure that the power cable is not energized and that the QuickPanel+ unit is not on.
2. Loosen the screw clamps on the mating power connector
3. Strip the insulation from the power cables.
4. Secure the power cable to the mating connector while noting polarity and tighten the screw clamps.
The torque for the attaching screws is 0.31 Nm.
5. Apply DC power to the unit.
During normal power up and operation, the QuickPanel Status LED display is:
 Solid amber while the QuickPanel+ unit is starting up
 Solid green during normal operation
6. Once power is applied, the QuickPanel+ begins initializing. The first thing to appear on the display is the splash screen.
To skip running any programs included in the StartUp folder, tap Don’t run StartUp programs.
7. The Microsoft Windows Embedded Compact 7 operating system starts automatically. During powerup, you should see the normal operating system starting displays.
To activate the operating system online, you will need to first configure the Ethernet settings for operation on your network, as described in “Initial Configuration.”
You can find the operating system product key on the Microsoft Certificate of Authenticity label, which is on the back of the QuickPanel+.

FTP Server

The FTP Server included with the QuickPanel+ supports standard (RFC 959). It does not support SFTP or implicit FTPS, which uses different ports and is based on SSH rather than SSL.
The configuration of the FTP server is accomplished with the Quick Panel+ Setup Tool. By default, the server is not enabled. Once enabled, a background program will run, waiting for clients to connect. Up to ten connections are supported. Sessions that are idle for five minutes are terminated by the server.

The Server supports:

■ Non-secure operation. All information including username, password, and data is transmitted with no encryption and susceptible to packet sniffing and various FTP attacks.