IS200WETCH1A   WETC机顶盒模块C组件

Product Description

The IS200WETCH1A is a board created by GE Energy for the Mark VIe system of wind turbine controls. The Mark VIe is a complete turbine control management system that has hardware and integrated software, along with a PC-based HMI that allows access to turbine data from a single location. This board may be more often referred to by its industry-known functional acronym of WETC, although this product is considered a revised version of the original  IS200WETCH1 parent board; featuring a singular A-rated functional revision. This PCB is more exactly definable as a Top Box Module C Board Assembly.

Hardware Tips and Specifications

The IS200WETCH1A is built with four fuses on its surface. Two of these fuses are located toward the center of the board and two are located in one corner, with all of the fuses featuring the standard FU industry-known nomenclature label. This IS200WETCH1A model has a single transformer component. There are two terminal strips opposite each other on short ends of the circuit card, each strip making use of six positions each. The IS200WETCH1A is populated by additional crucial hardware components, including but not limited to:

• forty-four voltage regulators
• two inductor coils
• integrated circuits
• hundreds of resistors
• various diodes
• hundreds of capacitors

Any resistor, capacitor, or diode present in the makeup of the IS200WETCH1A were included for voltage protection and storage purposes. The WETC  board has several relays and over forty plugs and jacks, primarily female. All of the plugs evident on the base board of this Top Box Module C Assembly are present on the very edge of the printed circuit board, for efficient connectivity.

The IS200WETCH1A has an exposed copper band located around the edge of the board.  Several terminals have been factory-drilled at locations along this band. This copper band acts as a primary insulation barrier between the  IS200WETCH1A circuit board, which may possess dangerous surface voltages, and its screw standofffs used in normal installation. This Top Box Module C Assembly Board has additional terminal holes located within the body of the board, and is marked with several other factory-printed labels and nomenclatures, including the manufacturer’s logo, with the id number, as well as several codes. Please refer to factory user guides or manuals for information regarding installation, which should have been issued along with your original purchase. Before making a purchase decision for this IS200WETCH1A model, please note that its status as a revised PCB may impact its overall dimensions or performance specifications greatly. All of the previously-mentioned hardware component parts unique to this WETC PCB should receive a solid level of protection from their conformal-style chemical PCB coating, which is designed to cover every surface of every available board assembly component.