IS220PDIAH1A Speedtronic MK VI燃气轮机控制系列 I/O包

IS220PDIAH1A是用于Mark VIe Speedtronic系统的I/O包模块。它通过电气接口将一个或两个I/O以太网网络连接到离散输出端子板，具有12个继电器通道，并可以接受来自接线板的反馈。该套件包括一块由所有Mark VIe分布式I/O套件共享的处理器板，以及一块专用于离散输出功能的采集板。

此外，IS220PDIAH1A具有以下特点：

1. 最多可控制12个继电器并接受来自接线板的反馈。
2. 磁继电器（TRLYH1B、C、D和F端子板）和固态继电器（TRLYH1E板）可供选择。
3. 由三针电源输入和两个RJ45以太网连接器供电。
4. 输出通过直接连接到相关端子板连接器的DC-37针连接器进行。
5. 与IS200TDBSH2A和IS200TDBTH2A端子板配合使用。
6. 额定电压为28.0伏直流电。

IS220PDIAH1A是GE Speedtronic MK VI燃气轮机控制系列的关键部件，是一个具有两个以太网端口的I/O包。它被描述为离散输入输出组件，可与其他端子板一起使用。在危险环境中使用时，需要特定的认证。

IS220PDIAH1A的另一特点是，当该包在供电时，所有的输出会被禁用，直到完成一些内部自检。此外，enable函数可以提供独立于命令的路径，这将确保继电器在包的初始化和上电期间保持断开状态。

IS220PDIAH1A 336A4940CSP1

IS220PDIAH1A is an I/O package module for Mark VIe Speedtronic systems. It connects one or two I/O Ethernet networks to a discrete output terminal board via an electrical interface, has 12 relay channels, and can accept feedback from the patch board. The kit includes a processor board shared by all Mark VIe distributed I/O suites, and a capture board dedicated to discrete output functions.

In addition, the IS220PDIAH1A has the following features:

Control up to 12 relays and receive feedback from the patch panel.
Magnetic relays (TRLYH1B, C, D and F terminal boards) and solid-state relays (TRLYH1E boards) are available.
It is powered by three pin power inputs and two RJ45 Ethernet connectors.
Output is done via a DC-37 pin connector connected directly to the associated terminal board connector.
Used with IS200TDBSH2A and IS200TDBTH2A terminal boards.
The rated voltage is 28.0 volts DC.

The IS220PDIAH1A, a key component of the GE Speedtronic MK VI gas turbine control family, is an I/O package with two Ethernet ports. It is described as a discrete input/output component that can be used with other terminal boards. Specific certification is required for use in hazardous environments.

Another feature of the IS220PDIAH1A is that when the package is powered, all output is disabled until some internal self-testing is done. In addition, the enable function can provide a path independent of the command, which will ensure that the relay remains disconnected during package initialization and power-on.