IS420UCSBS1A Mark VIe UCSB控制器模块（安全）

零件号:IS420UCSBS1A
制造商:通用电气
产品类型:UCSB控制器模块（安全）
系列:马克·维斯
冗余:单模块、双模块或三模块冗余（TMR）
内存存储类型:256 MB DDR2 SDRAM
处理器:600 MHz英特尔EP80579
尺寸（高x宽x深）厘米（英寸）:3.2厘米x 0.8cm厘米x 2.5cm厘米
供货情况:有现货
原产国:美国

IS420UCSBS1A是一个UCSB控制器模块，用作安全控制器。该模块是为Mark VIe和Mark VIeS系统设计的阿格控制器。该企业为工业涡轮机系统（如燃气和蒸汽涡轮机）的管理和控制开发了这些技术。

IS420UCSBS1A特性

• 它用于功能安全回路，以实现SIL 2和3功能。该模块是为Mark VIe和Mark VIeS系统设计的阿格控制器。
• IS420UCSBS1A是用于Mark VIeS的安全控制器模块。它经过认证可用于危险环境，尽管这种使用可能需要特殊和不寻常的安装要求。
• 该模块由英特尔EP80579 600 MHz CPU供电。
• 该控制器的电源标称电压为28.0 VDC（最小27.4 VDC，最大28.6 VDC。）它可以承受环境中-30到+65摄氏度的温度。
• 对于功能安全回路，通常使用该模块。这些器件旨在满足SIL2和SIL3要求。IS420UCSBS1A等控制器采用符合IEC 61508认证的控制硬件和软件制造，并采用面向安全的编程。
• QNX中微子操作系统是UCSB控制器的实时多任务操作系统。IS420UCSBS1A是一个独立的计算机模块。与标准控制器不同，它没有背板。该装置是独立的，有自己的电源。没有电池，也不需要跳线设置。
• UCSB控制器是运行应用程序代码的独立计算机。控制器安装在面板中，并通过板载I/O网络（IONet）接口与I/O包通信。IONet是一种专用以太网，仅支持Mark controls I/O模块和控制器。控制器操作系统（OS）是QNX中微子，一个实时多任务操作系统，专为高速、高可靠性的工业应用而设计。
• 与I/O位于背板上的传统控制器不同，UCSB控制器不会托管因维护或维修而断电时丢失的任何应用程序输入。Mark VIeS UCSBS1A安全控制器和安全I/O模块用于功能安全回路，以实现SIL 2和3功能。
• 熟悉安全仪表系统（SIS）应用的操作员使用Mark VIeS安全设备来降低关键安全功能的风险。安全控制器和分布式I/O模块是专门为安全控制使用而编程的。

UCSB控制器具有以下优势:

• 单一模块
• 内置电源
• 需要非跳线设置
• 没有电池
• 无风扇（UCSBS1A）
• 带IS420UCSBS1A的双冗余风扇
• 更小的面板尺寸
• 闪存可以方便地更新

UCSB装置

控制器包含在一个模块中，该模块直接连接到面板金属板。下图显示了模块外壳和安装尺寸。所有尺寸均以英寸为单位。如图所示，将UCSB安装到面板上，垂直气流通过散热片时不受阻碍。

控制器设置控制器设置（UCSBS1A）:

为应用程序执行控制逻辑
与/Opackseachframe通信
用于配置的与*应用程序的接口
通过以太网与其他监控应用程序接口

IS420UCSCH1A

Part No: IS420UCSBS1A
Manufacturer: General Electric
Product Type: UCSB Controller Module (Safety)
Series: Mark VIeS
Redundancy: Simplex, Dual, or Triple Modular Redundant (TMR)
Type of Memory Storage: 256 MB DDR2 SDRAM
Processor: 600 MHz Intel EP80579
Dimensions (H x W x D) cm (in): 3.2cm x 0.8cm x 2.5cm
Availability: In Stock
Country of Origin: USA

IS420UCSBS1A is a UCSB Controller Module and functions as a safety controller. This module is a GE controller that was built for the Mark VIe and Mark VIeS systems. The business created these technologies for the administration and control of industrial turbine systems, such as gas and steam turbines.

IS420UCSBS1A Features

• It is used for functional safety loops to achieve SIL 2 and 3 capabilities. This module is a GE controller that was built for the Mark VIe and Mark VIeS systems.
• The IS420UCSBS1A is a safety controller module for Mark VIeS. It is certified for use in hazardous environments, albeit such use may necessitate particular and unusual installation requirements.
• The module is powered by an Intel EP80579 600 MHz CPU.
• The power source for this controller has a nominal voltage of 28.0 VDC (Min 27.4 VDC, Max 28.6 VDC.) It can withstand temperatures ranging from -30 to +65 degrees Celsius in its environment.
• For functional safety loops, the module is commonly utilized. These are designed to meet SIL2 and SIL3 requirements. Controllers such as the IS420UCSBS1A are built with control hardware and software that satisfies IEC 61508 certification and use safety-oriented programming.
• The QNX Neutrino operating system is a real-time multi-tasking OS for this UCSB controller. The IS420UCSBS1A is a self-contained computer module. Unlike standard controllers, it does not have a backplane. The unit is self-contained and has its own power supply. There is no battery and no jumper settings are required.
• The UCSB controllers are stand-alone computers that run the application code. The controller mounts in a panel, and communicates with the I/O packs through on-board I/O network (IONet) interfaces. IONet is a private special purpose Ethernet that only supports Mark controls I/O modules and controllers. The controller operating system (OS) is QNX Neutrino, a real-time multitasking OS designed for high-speed, high-reliability industrial applications.
• Unlike traditional controllers where I/O is on a backplane, the UCSB controller does not host any application input that is lost if a controller is powered down for maintenance or repair. The Mark VIeS UCSBS1A Safety controller and safety I/O modules are used for functional safety loops to achieve SIL 2 and 3 capabilities.
• Mark VIeS Safety equipment is used by operators knowledgeable in safety instrumented system (SIS) applications to reduce risk in critical safety functions. Safety controllers and distributed I/O modules are programmed specifically for safety control use.

The UCSB controllers offer the following advantages:

• Single Module
• Built-in Power Supply
• Non Jumper settings required
• No battery
• No Fan (UCSBS1A)
• Dual- redundant fans with IS420UCSBS1A
• Smaller panel Footprint
• Flash memory can be conveniently updated

UCSB INSTALLATION

The controller is contained in a single module that is direct to the panel sheet metal. The following diagram shows the module envelope and mounting dimensions. All dimensions are in inches. The UCSB is to be mounted to the panel as shown with vertical airflow through the fins to be unobstructed.

Controller Set The controller set (UCSBS1A):

• Executesthecontrollogicfortheapplication
• CommunicateswiththeI/Opackseachframe
• InterfaceswiththeToolboxST*applicationforconfiguration
• Interfaces with other supervisory applications through Ethernet

It can be configured in a Simplex, Dual, or Triple Modular Redundant (TMR) arrangement, based on the availability requirements for the system. In Dual and TMR configurations, synchronization of data between controllers is automatically configured and performed in each frame.