MVI56-PDPMV1  Profibus DP V1兼容模块

MVI56-PDPMV1是一个ControlLogix平台兼容模块。该模块是Profibus DP V1兼容模块，在Profibus网络中充当主设备。该模块由Prosoft Technology开发，Prosoft Technology是罗克韦尔自动化的合作伙伴公司，开发Allen-Bradley PLC兼容模块。

MVI56-PDPMV1具有一（1）个RS485端口，该端口是光学隔离的，支持PROFIBUS DP版本1协议。多达125个PROFIBUS从设备可以连接到该端口，该端口也与PPROFIBUS中继器兼容。该模块能够配置多达1536个循环字节和1536个输出字节，并支持扩展诊断数据。

MVI56-PDPMV1支持的其他功能包括报警处理、同步和冻结命令，支持PROFIDrive版参数读写操作、组播和广播报文。

MVI56-PDPMV1具有嵌入式LED状态指示灯，用于显示模块的运行状态。这些led指示灯包括就绪、运行、错误和令牌指示灯。

MVI56-PDPMV1 PROFIBUS通信模块安装在1756 ControlLogix底盘上。它占用机箱的一个插槽，并从背板吸取800 mA @ 5VDC和3 mA @ 24VDC的电流。它的工作温度为0摄氏度至60摄氏度（32华氏度至140华氏度），储存温度为-40摄氏度至85摄氏度（-40华氏度至185华氏度）。该模块必须安装在适当的外壳中，在相对湿度为5%到95%的情况下，10赫兹到150赫兹的振动不超过5克，冲击不超过30克，不冷凝。

MVI56-PDPMV1模块是单槽模块，适合兼容1756背板。当连接到处理器时，它被识别为输入/输出模块。

此外，模块在处理器存储器中移动，以便在处理器和模块之间传输数据。通常，该模块用作PROFIBUS网络扫描器、PROFIBUS设备的数据传输中介以及背板上的处理器数据存储器传输。

MVI56-PDPMV1模块的环境条件包括工作温度范围为0至60摄氏度（32至140华氏度），储存温度范围为-40至85摄氏度（-40至185华氏度），10至150赫兹的抗振性为5克，抗冲击性为30克（不工作时为50克），相对环境湿度为5至95%（非冷凝）。

MVI56-PDPMV1

The MVI56-PDPMV1 is an ControlLogix platform compatible module. This module is a Profibus DP V1 compatible module that acts as the Master device in the Profibus network. This module is developed by Prosoft Technology, an encompass partner company of Rockwell Automation that develops Allen-Bradley PLC compatible modules.

The MVI56-PDPMV1 features One (1) RS485 port that is optically isolated, supporting PROFIBUS DP Version 1 protocol. Up to 125 PROFIBUS slave devices can be connected to this port which is also compatible with PPROFIBUS repeaters. This module has the capability of being configured up to 1536 cyclic bytes and 1536 bytes of output and supports extended diagnostic data.

Other functions supported by the MVI56-PDPMV1 include Alarm Handling, Synch and Freeze commands, Supports PROFIDrive version 3.1 parameter read and write operations, multicast and broadcast telegrams.

The MVI56-PDPMV1 has embedded LED status indicators for depicting the state of operation of the module. These LEDs indicators include Ready, Run, Error and Token indicators.

The MVI56-PDPMV1 PROFIBUS communication module is installed to a 1756 ControlLogix chassis. It occupies a single slot of the chassis and draws a current amounting to 800 mA @ 5VDC and 3 mA @ 24VDC from the backplane. It has an operating temperature of 0°C to 60°C (32°F to 140°F) and storage temperature of -40°C to 85°C (-40°F to 185°F). This module must be installed in an appropriate enclosure with vibration not exceeding 5 g from 10 Hz to 150 Hz and shock of 30 g with relative humidity of 5% to 95%, non-condensing.

The MVI56-PDPMV1 module is single slot module that fits within a 1756 backplane compatible. It is recognized as an input/output module when connected to a processor.

Also, the module shifts through the processor memory in order to transfer data between the processor and module. Generally, the module serves as a PROFIBUS network scanner, a data transfer mediator for PROFIBUS devices, and a processor data memory transfer over the backplane.

The environmental conditions for the MVI56-PDPMV1 module include an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), the storage temperature range is -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit), 5G of vibration resistance from 10 to 150 Hertz, 30G of shock resistance (50G when not in operation) and 5 to 95% relative ambient humidity (non-condensing).