NXL00045C1N1SSS00 紧凑型变频器

Basic Application是一个简单易用的应用程序。这是出厂时的默认设置。否则，请选择S6.2页M6菜单中的“基本应用”。请参阅产品的用户手册。
数字输入DIN3可编程。
基本应用的参数说明见本手册第9章参数说明。说明按照参数的单个ID号排列。
1.1.1电机保护功能中的基本应用
基本应用程序提供几乎所有与其他应用程序相同的保护功能:
•外部故障保护
•输入阶段监督
•欠压保护
•输出相监督
•接地故障保护
•电机热保护
•热敏电阻故障保护
•现场总线故障保护
•槽位故障保护

有关交流变频器一般使用的参数和功能，如应用程序和语言选择，定制参数集或硬件和软件信息，请参阅产品的用户手册。
1.4.5扩展板(控制键盘:菜单m7
M7菜单显示控制板附带的扩展板和选项板及其相关信息。有关更多信息，请参阅产品的用户手册。

在S6.2页的M6菜单中选择标准应用程序。
标准应用程序通常用于泵和风扇应用程序和输送机，基本应用程序太有限，但不需要特殊功能。
•标准应用程序具有与基本应用程序相同的I/O信号和相同的控制逻辑。
•数字输入DIN3，所有输出可自由编程。附加功能:
•可编程启动/停止和反向信号逻辑
•参考缩放
•一次频率限制监管
•第二坡道和s形坡道规划
•可编程启动和停止功能
•直流制动停止
•一个禁止频率区域
•可编程U/f曲线和开关频率
•Autorestart
•电机热和失速保护:可编程动作;关，警告，故障
标准应用程序的参数说明见本手册第9章参数说明。说明按照参数的单个ID号排列。

NXL00045C1N1SSS00

The Basic Application is a simple and easy-to-use application. It is the default setting on delivery from the factory. Otherwise select the Basic Application in menu M6 on page S6.2. See the product’s User Manual.
Digital input DIN3 is programmable.
The parameters of the Basic Application are explained in Chapter 9 Parameter descriptions of this manual. The explanations are arranged according to the individual ID number of the parameter.
1.1.1 MOTOR PROTECTION FUNCTIONS IN THE BASIC APPLICATION
The Basic Application provides almost all the same protection functions as the other applications:
• External fault protection
• Input phase supervision
• Undervoltage protection
• Output phase supervision
• Earth fault protection
• Motor thermal protection
• Thermistor fault protection
• Fieldbus fault protection
• Slot fault protection

For parameters and functions related to the general use of the AC drive, such as application and language selection, customised parameter sets or information about the hardware and software, see the product’s User Manual.
1.4.5 EXPANDER BOARDS (CONTROL KEYPAD: MENU M7
The M7 menu shows the expander and option boards attached to the control board and board related information. For more information, see the product’s User Manual.

Select the Standard Application in menu M6 on page S6.2.
The Standard Application is typically used in pump and fan applications and conveyors for which the Basic Application is too limited but where no special features are needed.
• The Standard Application has the same I/O signals and the same control logic as the Basic Application.
• Digital input DIN3 and all the outputs are freely programmable. Additional functions:
• Programmable Start/Stop and Reverse signal logic
• Reference scaling
• One frequency limit supervision
• Second ramps and S-shape ramp programming
• Programmable start and stop functions
• DC-brake at stop
• One prohibit frequency area
• Programmable U/f curve and switching frequency
• Autorestart
• Motor thermal and stall protection: Programmable action; off, warning, fault
The parameters of the Standard Application are explained in Chapter 9 Parameter descriptions of this manual. The explanations are arranged according to the individual ID number of the parameter.