产品详情
详情介绍:REF615C-E HCFFAEAGABC2BAA11E 馈线保护测控装置 REF615
REF615是一款专用于馈线保护测控的装置,可用于公用变电站和工业配电系统的保护,控制,测量和监视,包括具备或不具备分布式电源的辐射型、环形和网格型配电网。REF615是ABB Relion®产品家族中615保护测控装置产品系列的成员。615系列装置具有结构紧凑和易拆卸的特点。615系列保护测控装置是基于IEC 61850标准全新研发和设计的,支持变电站内自动化设备之间互操作与水平通信。该装置可作为配网架空线和馈线的主保护。也可在要求独立或要求冗余的保护系统中的用作后备保护。
该系列产品提供多种标准配置,可用于保护中性点不接地,电阻接地,补偿性接地和直接接地网络中的架空线和馈线。仅需根据特定应用进行设置,便可直接投入使用。
615系列装置支持多种通信协议,包括IEC 61850版本2,基于IEC 61850-9-2 LE的过程总线,IEC 60870-5-103,Modbus®。通过SPA-ZC 302协议转换器,可支持Profibus DVP1 通信。
REF615有五个可选标准配置。标准信号配置可以通过保护和测控装置管理工具PCM600的信号矩阵或图形化配置功能进行修改。此外,PCM600中的应用配置功能支持创建多层逻辑,可以使用包括定时器和触发器在内的多种不同逻辑元件。将保护功能与逻辑功能模块相结合,配置可满足用户不同的应用需求。
出厂装置采用下列功能图描述的开关量输入、开关量输出、功能间联系和告警灯的默认连接。REF615中支持的其他功能必须先通过应用配置工具添加,然后可在信号矩阵工具和装置中找到。方向保护功能以指向线路为正方向。
REF615馈线保护测控装置可提供方向/无方向的过流保护和热过负荷保护,亦可为馈线提供方向和无方向的接地保护。除了方向接地保护之外,标准配置还提供了导纳接地保护,谐波接地保护或功率接地保护。此外,装置还提供灵敏接地保护、断相保护、瞬时性/间歇性接地保护、过电压和低电压保护、零序过电压保护、正序低电压保护和负序过电压保护。频率保护,包括过频,低频和频率变化率保护由配有标准配置J和N的装置提供。此外,装置还提供可选多次自动重合闸功能,用于架空线路馈线。
标准配置N还可提供多频导纳接地保护,为高阻抗接地电网提供选择性的方向接地保护。该保护功能基于测得的中性点多频导纳,该多频导纳值的测量需要用到Uo和Io中的基波分量以及谐波分量。专用的滤波算法保证了在间歇性接地及电弧复燃的的情况下也能安全可靠地判别故障方向。
作为一个单独的保护功能,该保护无论在低电阻接地,较高电阻接地,还是瞬时性接地/间歇性接地/电弧复燃的情况下都能保证很好的可靠性和灵敏性。作为可选功能,通过配置相应的硬件和软件,可增加三个弧光检测通道,实现对金属铠装开关柜的电缆室、母线室和断路器室的弧光保护。弧光保护传感器接口由可选通信模块提供。当发生弧光故障时,弧光保护可在短时间内快速动作从而为人身安全提供了保障,并将电弧故障对开关设备的损坏程度降到最低。开关量输入/输出模块可作为可选项——包含3个高速开关量输出(HSO),与普通开关量输出相比,可以进一步减少4…6ms总体动作时间。
The REF615 is a feeder protection measurement and control device for the protection, control, measurement and monitoring of utility substations and industrial distribution systems, including radiant, ring and grid distribution networks with or without distributed power sources. The REF615 is a member of the 615 Protection Measurement and Control Unit family in the ABB Relion® product family. The 615 series devices are compact and easy to disassemble. The 615 series protection and control devices are newly developed and designed based on the IEC 61850 standard to support interoperability and horizontal communication between the automation equipment in the substation. The device can be used as the main protection of overhead lines and feeder lines in distribution network. It can also be used as backup protection in protection systems that require independence or redundancy.
Available in a variety of standard configurations, this family can be used to protect neutral ungrounded, resistive grounded, compensatory grounded and direct grounded overhead lines and feeders in networks. Just set it up for your specific application and it’s ready to go.
The 615 series devices support multiple communication protocols, including IEC 61850 Version 2, the process bus based on IEC 61850-9-2 LE, IEC 60870-5-103, Modbus®. Through the SPA-ZC 302 protocol converter, Profibus DVP1 communication can be supported.
The REF615 comes in five optional standard configurations. The standard signal configuration can be modified through the signal matrix or graphical configuration function of the PCM600 protection and measurement and control device management tool. In addition, the application configuration feature in the PCM600 enables the creation of multiple layers of logic that can use many different logic elements, including timers and triggers. The protection function is combined with the logical function module to meet different application requirements.
The factory device adopts the default connection of switch input, switch output, interfunction connection and alarm light as described in the following function diagram. Additional features supported in REF615 must first be added via the application configuration tool and then found in the Signal Matrix tools and devices. The direction protection function takes the pointing line as the positive direction.
The REF615 Feeder Protection measurement and control device provides directional/non-directional overcurrent protection and thermal overload protection, as well as directional and non-directional ground protection for feeders. In addition to directional grounding protection, the standard configuration also offers admittance grounding protection, harmonic grounding protection or power grounding protection. In addition, the device provides sensitive ground protection, phase break protection, transient/intermittent ground protection, overvoltage and low voltage protection, zero sequence overvoltage protection, positive sequence undervoltage protection and negative sequence overvoltage protection. Frequency protection, including overfrequency, low frequency and rate of frequency change protection, is provided by devices equipped with standard configurations J and N. In addition, the unit provides an optional multiple automatic reclosing function for overhead line feeders.
The standard N also provides multi-frequency admittance ground protection, providing selective directional ground protection for high-impedance grounded networks. The protection function is based on the measured multi-frequency admittance of the neutral point, and the measurement of the multi-frequency admittance value requires the fundamental and harmonic components in Uo and Io. The special filtering algorithm ensures that the fault direction can be identified safely and reliably in the case of intermittent grounding and arc reignition.
As a separate protection feature, the protection guarantees excellent reliability and sensitivity in the case of low resistance ground, high resistance ground, or transient ground/intermittent ground/arc reignition. As an optional function, by configuring the corresponding hardware and software, three arc detection channels can be added to realize the arc protection of the cable room, the bus room and the circuit breaker room of the metal armored switchgear. The arc protection sensor interface is provided by an optional communication module. When the arc fault occurs, the arc protection can act quickly in a short time to ensure personal safety and minimize the damage of the arc fault to the switchgear. Switching input/output module is available as an optional – contains 3 high-speed switching output (HSO), which can further reduce the switching output by 4… 6ms Total movement time.
热卖型号:PR6423/003-030+CON021 涡流信号变换器
128277-01未来扩展面板Bently内华达州3500/ 22m 138607-01 Bently检测器模块
A413139 PC板电路板模块组装metso 3500/94 145988-01弯曲显示模块
D201471美卓RT节点PC AP31 D200137个性模块3500/ 42m 176449-02弯曲内华达轴振动模块
A413188 PC板电路板模块总成metso 3500/92 136180-01 bent nevada通信网关模块
A413331 PC板电路板模块组装metso 136180-01本特利内华达州通信网关模块
85UVF1A-1QD Fireye集成火焰扫描仪,内置火焰继电器3500/92-03-01-00
516TX 336A4940DNP516TX GE A微处理器器件7264 ABB四通道SSI接口模块功能自动
516TX-336A4940DNP516TX GE微控制器mdb – 8e赛多瑞斯称重传感器
2mlr – cput HONEYWELL CPUHT总线功能3500/15 127610-01 Bently Nevada数字输入模块
177313-01-01 BENTLY NEVADA振动监测模块3500/50 133388-02 BENTLY NEVADA转速计监测模块4通道
PXIE-6556 NI自动工业控制模块3500/40-03-00 176449-01 BENTLY NEVADA膨胀轴向定位模块
PFCL201CE ABB压力传感器控制器3500/15塑料面板BENTLY NEVADA交流和直流电源
MTL BPHM64伊顿安全栅格底板x20cp1586贝加莱I/O系统线核心产品
1794- if4ixt Allen Bradley Flex I/O 1794系列输入模块ic698psa350 GE大容量电源模块
1734-IM4艾伦布拉德利点I/O 4点数字输入模块vmivme 3215-000 GE计算机模块
1769-ECR艾伦布拉德利右端盖(ECR)模块一起使用201ti GE微处理器为基础的电气变送器
136188-02 Bently Nevada以太网/RS232 Modbus I/O模块3500/05-01-02-00-00-01 Bently系统机架
AI02J ABB模拟输入模块pm865k02 ABB控制器
DSSA165 ABB交流电源模块3500/22-01-01-00 138607-01 BENTLY瞬时数据接口前后大小卡模块
PXIe-1073 NI PXI机箱is420ucshbh4a GE通用电气公司生产的控制器模块
F860-CA霍尼韦尔C系列现场总线接口模块d201376 METSO模拟输入模块
DSSA165 ABB交流电源模块d201376 METSO模拟输入模块
125840-02本特利电源模块is420ucshbh4a GE控制器模块
125680-01弯曲位移检测模块is220prtdh1a 336A4940CSP6 GE控制器模块