SE3008 KJ2005X1-MQ2 13P0072X082 SQ控制器 VE3008

除了传统的I/O卡之外，本地总线还支持现场总线技术，包括FOUNDATION现场总线、Profibus DP、DeviceNet和AS-i协议。I/O子系统还支持串行接口卡和以太网I/O接口。这些不同的I/O产品提供广泛的接口，以满足您的控制应用程序的需求。
SQ控制器还支持CHARMs和无线shart I/O卡。CHARM I/O卡(CIOC)通过控制器的冗余以太网端口连接，提供高度分布式和灵活的I/O解决方案，称为电子编组。多达16个CIOC可以与一个控制器通信，每个控制器提供多达96个单独可配置的信号类型。
SQ控制器的容量限制可能会根据特定应用、CHARM I/O信号的数量以及控制性能要求而有所不同。通过索引，在SQ控制器的诊断信息中添加了增强的内存处理和覆盖容量和内存的硬件警报。
WirelessHART I/O卡(WIOC)为多达100台WirelessHART设备提供冗余通信，提供无线数据的高可用性和可靠性。
多达16个无线shart I/O卡可以与一个控制器通信，每个控制器提供多达100个信号。控制器根据指定的扫描速率自动调度控制模块。这使得每个控制功能都可以根据过程动态进行优化。模块扫描时间可以设置快至100毫秒，慢至60秒。每个控制器可分配的控制模块数量取决于每个控制模块的复杂度、扫描速率以及可用的CPU和内存。
SQ控制器应用于最多750个独立I/O信号的中小型应用程序。
SQ控制器专为恶劣环境设计，额定工作环境为G3腐蚀环境，工作温度范围为-40℃~ 70℃。它非常适合远程安装，靠近工艺设备。对于带有中央编组柜的更传统的安装，CHARM I/O卡可以安装在提供电子编组的标准I/O柜中。CHARM I/O卡也可以用于高度分布式的I/O应用程序。

SE3008

In addition to traditional I/O cards, the local bus supports fieldbus technologies, including FOUNDATION Fieldbus, Profibus DP, DeviceNet and AS-i protocols. The I/O subsystem also supports Serial interface cards as well as the Ethernet I/O interface. These various I/O products provide a wide range of interfaces to meet the needs of your control application.
The SQ controller also supports CHARMs and WirelessHART I/O cards. The CHARM I/O Card (CIOC) connects via the redundant Ethernet ports of the controller to provide a highly distributed and flexible I/O solution called Electronic Marshalling. Up to 16 CIOC’s can communicate to one controller, each providing up to 96 individually configurable signal types.
The capacity limits of the SQ controller may vary depending on the particular application, amount of CHARM I/O Signals and as well control performance requirements. Enhanced memory handling and hardware alerts covering capacity and memory, via indexes, got added to the diagnostic information’s of the SQ controller.
The WirelessHART I/O card (WIOC) provides redundant communication for up to 100 WirelessHART devices, providing high availability and reliability of wireless data.
Up to 16 WirelessHART I/O cards can communicate to one controller, each providing up to 100 signals. Control modules are automatically scheduled by the controller, based on their assigned scan rates. This allows each control function to be optimized based on the process dynamics. Modules scan times can be set as fast as 100 ms, and as slow as 60 seconds. The number of control modules that can be assigned to a controller depends on the complexity and scan rate of each module, and the available CPU and memory.
The SQ controller should be used for small to medium applications with a maximum of 750 individual I/O signals.
The SQ controller is designed for harsh environments and is rated for G3 corrosive environments, with an operating temperature range from -40 to 70°C. It is ideally suited for remote installation, close to the process equipment. For more traditional installations with central marshalling cabinets, CHARM I/O Cards can be mounted in standard I/O cabinets providing Electronic Marshalling. CHARM I/O Cards can also be used for highly distributed I/O applications.