Yokogawa GP10 GP10/GP20是便携式无纸记录仪

概述
GP10/GP20是便携式无纸记录仪，可在触摸屏上显示实时测量数据，并将数据保存在外部存储介质(SD卡)上。
输入输出模块规格请参见GX90XA/GX90XD/GX90YD/GX90WD/GX90XP/ GX90YA输入输出模块和GX90UT PID控制模块通用规范(GS 04L53B01- 01EN, GS 04L53B01- 31en)。
●模拟输入数:GP10可扩展I/O*1, GM子单元*1，模拟输入数:GP20标准型(GP20-1)可扩展I/O*1，模拟输入数:GP20标准型(GP20-1)可扩展I/O*1，模拟输入数:GP20大内存型(GP20-2)可扩展I/O, GM子单元，模拟输入数:450通道*2。
*1个扩展通道数量的单元。
* 2 Max。输入/输出通道数为500通道。
●GP10/GP20具有大内存(GP10/GP20-1: 500MB, GP20-2: 1.2 GB)，可以长时间记录和保存。
●作为输入信号，每个通道可设置直流电压、热电偶、电阻温度检测器、DI (DCV输入(TTL)、触点信号)或mA(直流电流)。
●模拟输出可进行各种信道的重传输出，也可进行手动输出。它通过隔离通道提供电流输出。(模拟量输出模块)
●输入输出采用模块化结构，可方便扩展。(GP10:马克斯。3*， GP20:最大。10 *)
*如果使用可扩展I/O, GM子单元，GP10可扩展2个单元，GP20可扩展9个单元。
●一个模块类型有7种，模拟输入、模拟输出、数字输入、数字输出、数字输入/输出、脉冲输入、PID控制。
●GP10/GP20可连接多达6个可扩展I/O单元和GM子单元。每个可扩展I/O和GM子单元最多可包含6个模块。采用可扩展I/O, GM子单元连接，GP10和大存储器型GP20可以使用多个通道。此外，I/O端口可以安装在GP10/GP20所在的不同位置，从而帮助您减少布线需求并构建分散的配置。
●可通过轻弹、夹进、夹出等直观操作。
●记录的过去趋势可以无缝显示在趋势屏上。
●此外，还可以对日历屏幕上指定的时间的测量数据进行搜索和显示。
●具有手写留言、报表文件PDF/Excel输出、直接输出到网络打印机、趋势显示刻度移动、蜂鸣器等多种功能。
●可通过以太网连接到网络上，可以通过电子邮件通知、网站监控以及使用FTP传输文件。此外，它还可以与Modbus/RTU或Modbus/ TCP进行通信。
●在高速测量中，通过使用高速模拟输入模块(高速AI)，可以实现最短间隔1ms的测量。
●在双间隔测量中，可以通过设置两个不同的扫描间隔来进行测量。
●通过安装PID控制模块，PID控制功能可实现多达20个回路的PID控制(GP10/GP20-1为6个回路)。
●程控功能通过使用PID控制模块和程控功能(/PG选项)，实现多达99种模式的程控。每个段最多可设置32个时间事件和32个PV事件。
*对于PID控制模块、PID控制功能、程序控制功能(/PG)，请参见《GX90UT PID控制模块通用规范(GS 04L53B01-31EN)》。
*本通用规范内容与版本号4、型号号2的GP10/GP20相对应。
版本号:固件ID号样式号:硬件ID号

Yokogawa GP10

 OVERVIEW
The GP10/GP20 are portable type paperless recorders that display real-time measured data on a touch screen and save data on an external storage medium (SD card).
For the input/output module specification, please see GX90XA/GX90XD/GX90YD/GX90WD/GX90XP/ GX90YA Input/Output Module and GX90UT PID Control Module General Specification (GS 04L53B01- 01EN, GS 04L53B01-31EN.)
● The number of analog input is a maximum of 100 channels in GP10 with expandable I/O*1, GM sub unit*1, a maximum of 100 channels in GP20 standard type (GP20-1) with expandable I/O,and a maximum of 450 channels*2 in GP20 large memory type (GP20-2) with expandable I/O, GM sub unit.
*1 A unit for expanding the number of channels.
*2 Max. number of input/output channels is 500 channels.
● The GP10/GP20 have the large internal memory (GP10/GP20-1: 500MB, GP20-2: 1.2 GB), and prolonged record and preservation are possible.
● As the input signal, a DC voltage, thermocouple, resistance temperature detector, DI (DCV input (TTL), contact signal), or mA (DC current) can be set to each channel.
● Analog output is capable of retransmission output of various types of channels and also manual output. It provides current output with channels that are isolated. (Analog output module)
● Input and output have module structure and it can extend them easily. (GP10: max. 3*, GP20: max. 10*)
* In case of using expandable I/O, GM sub unit, GP10 can extend two units, GP20 can extend 9 units.
● A module type is seven types, an analog input, a analog output, a digital input, a digital output, a digital input/output, a pulse input, and a PID control.
● Up to 6 units of expandable I/O units and GM sub units can be connected to the GP10/GP20. Each expandable I/O and GM sub unit can incorporate a maximum of six modules. With expandable I/O, GM sub unit connected, GP10 and the large memory type GP20 can use multiple channels. Furthermore, the I/O ports can be installed in separate locations from where GP10/GP20 is located, helping you reduce wiring requirements and build a decentralized configuration.
● The intuitive operation by flick, pinch in, and pinch out are possible.
● The past trend under recording can be seamlessly displayed on a trend screen.
● Moreover, the measurement data of the time specified on the calendar screen can be searched and displayed.
● Various functions, such as a freehand message, a PDF/Excel output of a report file, a direct output to a network printer, a scale movement of a trend display, and a buzzer, are equipped.
● It can be hooked up to network via Ethernet, which enables to inform by Email and to monitor on Web site as well as to transfer files by using FTP. Also, it can communicate with Modbus/RTU or Modbus/ TCP.
● In high-speed measurement, measurement at the shortest interval of 1 ms is possible by using a highspeed analog input module (high-speed AI).
● In dual interval measurement, measurement can be performed by setting two different scan intervals.
● The PID control function enables PID control on up to 20 loops (6 loops for the GP10/GP20-1) by installing a PID control module.
● The program control function enables program control of up to 99 patterns by using a PID control module and program control function (/PG option). Up to 32 time events and 32 PV events can be set for each segment.
* For PID control module, PID control Function, and program control function (/PG), see the GX90UT PID Control Module General Specifications (GS 04L53B01-31EN)
* The contents of this general specifications correspond to the GP10/GP20 with release number 4 and style number 2.
Release number: firmware ID number Style number: hardware ID number