5448-890 SPM-D10 三相交流发电机 基于微处理器的同步器

SPM-D10是一种基于微处理器的同步器，设计用于配备Woodward或其他兼容的速度控制和自动电压调节器的三相交流发电机。SPM-D10同步器使用模拟或离散输出偏置信号提供自动频率，相位和电压匹配。HJV包提供额外的市电保护。零件号码。SPM-D1040B/XN是SPM-A同步器的直接替代品。

•相位匹配或滑动频率同步与电压匹配
•发电机和母线两相感应
•可选择的工作模式，如SPM-A(运行，检查，允许和关闭)
•同步检查可能
•同步时间监控隔离操作
•频率控制
•电压控制死母线操作
•按需关闭CB

•模拟偏置输出电压和速度可自由配置的所有级别(+/-1 V， +/- 3 V, 0至5 V, 0.5至4.5 V， +/-10 V +/-5 V, 0至20 mA， +/-20 mA，和更多的可配置)
•速度偏置输出可配置为500 Hz PWM输出与可调电压水平
•两个上升/下降输出可配置的速度或电压操作功能
•双线液晶显示操作和报警指示
•同步示波器
•控制活动和断路器状态指示
•参数多级密码保护
•配置直接或通过PC
•英语或德语可调

SPM-D10

The SPM-D10 is a microprocessor-based synchronizer designed for use on three phase AC generators equipped with Woodward or other compatible speed controls and automatic voltage regulators. The SPM-D10 synchronizer provides automatic frequency, phase and voltage matching using either analog- or discrete output bias signals. The HJV Package provides additional mains protection. Part-No. 8440-1668 SPM-D1040B/XN is a direct replacement of the SPM-A synchronizer.

• Phase match or slip frequency synchronization with voltage matching
• Two-phase sensing of generator and bus
• Selectable operating modes like SPM-A (Run, Check, Permissive, and OFF)
• Synchro-check possible
• Synchronization time monitoring Isolated operation
• Frequency control
• Voltage control Dead bus operation
• Closing of CB on demand

• Analog bias outputs for voltage and speed freely configurable for all levels (+/-1 V, +/- 3 V, 0 to 5 V, 0.5 to 4.5 V, +/-10 V +/-5 V, 0 to 20 mA, +/-20 mA, and much more configurable)
• Speed bias output configurable as 500 Hz PWM output with adjustable voltage level
• Two raise/lower outputs configurable for either speed or voltage Operating Features
• Two-line Liquid Crystal display for operation and alarm indication
• Synchroscope
• Indication of control activity and breaker state
• Multi-level password protection for parameters
• Configuration directly or via PC
• English or German language adjustable